505788
257
Zoom out
Zoom in
Previous page
1/307
Next page
17
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by wired or wireles LAN
communicaton, an external device that is connected with this projector by RS-
232C communication can be controlled from the computer as a network terminal.
For details, see the 6. Network Bridge function in the Network Guide.
Network Bridge Communication
LAN
LAN cable
(CAT-5 or greater)
RS-232C
RS-232C cable
(cross)
USB wireless adapter
NOTE • If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Connection
1.
If you use wired LAN, connect the computer's LAN port and the projector's
LAN port with a LAN cable. Use the cable that fullls the specication shown
in gure. If you use wireless LAN, insert the USB wireless adapter into the
projector's LAN port.
2.
Connect the projector's CONTROL port and the RS-232C port of the devices
that you want to control with a RS-232C cable.
3.
Turn the computer on, and after the computer has started up turn the
projector on.
4.
Set the COMMUNICATION TYPE to NETWORK BRIDGE in the
COMMUNICATION menu of the OPTION - SERVICE menu.
Network Bridge Communication
257


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-SX8350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-SX8350 in the language / languages: Polish as an attachment in your email.

The manual is 10,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CP-SX8350

Hitachi CP-SX8350 User Manual - English - 307 pages

Hitachi CP-SX8350 User Manual - German - 307 pages

Hitachi CP-SX8350 User Manual - Dutch - 307 pages

Hitachi CP-SX8350 User Manual - French - 307 pages

Hitachi CP-SX8350 User Manual - Italian - 307 pages

Hitachi CP-SX8350 User Manual - Portuguese - 307 pages

Hitachi CP-SX8350 User Manual - Swedish - 307 pages

Hitachi CP-SX8350 User Manual - Spanish - 307 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info