565926

Hitachi CM14E Manual

9
Zoom out
Zoom in
Previous page
1/232
Next page
9
GB
Spectators children and fellow workers must be
warned to come no nearer than 9 m while the
cutter is in use. Shut off the cutter immediately if
some one moves closer to you than 9 m. Persons
working in the area near you should wear the
same protective equipment as the cutter operator if
endangered by risky fl ying debris.
Preparing for Use
Protective Equipment
WARNING
Cutter users risk injury if the cutter is used
improperly, and / or safety precautions are
not followed. Protective clothing and safety
gear must be worn when operating a cutter.
z You must wear eye protection goggles qualifi ed
to the CE mark or the latest ANSI Standard Z
87. (Z 87 is stamped on the goggles). These
goggles also must be worn under a face screen
if one is used. A face screen should be worn
when there is a risk from fl ying debris.
z Hearing protection should be worn. (See
“DANGER,” page 16)
z Wear a respirator or dust mask when cutting
concrete, stone, brick or other materials where
fi ne dust is produced while cutting. Use water
fl ush to keep down the dust.
z Clothing should be made from fabric containing
natural fi bers that resist catching fi re and do not
melt. The clothing should cover as much skin
area as possible. Clothing should offer freedom
of movement, but should not be too loose or
baggy. Do not wear ties or jewelry.
z Wear heavy duty boots with non-slip soles. The
boots should be high enough for shin protection,
or you should wear chaps for shin protection.
z Wear non-slip, heavy duty work gloves to
improve your grip on the cutter handles. The
gloves also help to reduce the transmission of
machine vibrations to your hands.
Hard Hat
No Bystanders!
Hearing Protection
Goggles (Z 87)
Dust Mask or Respirator
Trim-Fitting
Protective Clothing
Heavy Duty non-Slip Gloves
Chaps or High Boots
for Spark Protection
Heavy Duty Boots
with non-Slip Soles
Protecting Others
CM14E_WE_all.indb 9CM14E_WE_all.indb 9 2008/02/05 21:09:302008/02/05 21:09:30
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CM14E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CM14E in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info