149093
12
Zoom out
Zoom in
Previous page
1/22
Next page
ENGLISH - 11 -
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
4:3
Setting Sharpness
• Using “
“ or “ ” button select Sharpness.
• Press “
” button to increase peaking level.
• Press “
” button to decrease peaking level.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
4:3
Setting Hue
(During Playback NTSC system, this will appear in AV mode
only when NTSC video source is applied. Otherwise, HUE
option is invisible in Picture menu.):
• Using “
“ or “ ” button select Hue.
• Press “
” button to increase hue level.
• Press “
” button to decrease hue level.
Center value is indicated with the two reciprocal arrows.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
HUE
MODE
STORE
4:3
Mode
This item is used to change the picture size. By pressing “
or “
” button you may choose one of these options: “4:3”,
“16:9” and “AUTO”. It is also possible to change picture modes
directly by pressing button “
” on your remote control.
4:3
This option forces the picture ratio to 4:3 mode.
16:9
This option forces the picture ratio to 16:9 mode.
AUTO This allows to change the picture mode automatically,
according to the transmission of the selected channel. For
example, your TV is 4:3 mode, but the transmission of that
channel is in 16:9 mode. If you select the AUTO mode, the TV
is switched to 16:9 mode automatically. If the TV is in 4:3
mode and the picture ratio of the channel is also 4:3, there will
be no affect selecting the picture mode to AUTO mode.
WSS feature is only used in TV and F-AV modes. For the Pic-
ture Mode selection in AV-1 and AV-2 the pin 8 (of Scart) value
is used. In RGB and SVHS modes the Picture Mode can be
4:3, 16:9 (Auto mode is not available.).
When the menu appears on screen, picture mode will auto-
matically change to its default tube mode (4:3 or 16:9) but it
will turned to its stored mode when the menu disappears.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
4:3
To Store the Settings
• Press “
” or “ ” button on STORE option to store Picture
menu settings except Picture Mode.
The stored picture mode setting will be valid only in current
program. However, the other stored values in Picture Menu will
be valid for all the programmes.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
4:3
OK
Feature Menu
• To enter the Feature menu directly, press the “YELLOW
button, or
• Press "
" button, now you are in Main menu. In the Main
menu, select FEATURE using “ or ” button. Then enter the
Feature menu pressing “
” or “ ” button.
SOUND
PICTURE
FEATURE
INSTALL.
PROGRAM.
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be the first
selected option. Use “ ” or “ ” button to change the Sleep
Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00,
1:15:00, 1:30:00, 1:45:00 and 2:00:00.
It is displayed on the upper right of the screen. If sleep timer is
activated it is displayed with the TV status and erased with it
after 3 seconds.
0:15 : 00
SLEEP TIMER
CHILD LOCK
LANGUAGE
AV-2 OUTPUT
OFF
OFF
ENGLISH
TV
If there is only one minute of the countdown timer left, it is dis-
played automatically on the upper right side of the screen and
stays there until finished. Then TV goes automatically to stand-
by.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi cl21f60s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi cl21f60s in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info