54098
10
Zoom out
Zoom in
Previous page
1/22
Next page
GB - 9 -
Before Switching on your TV
Power connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Aerial Connections
 Connect the aerial plug to the aerial input socket lo-
cated at the back of the TV.
How to connect other devices
IMPORTANT: Switch off the TV before connecting any
external device.
Sockets for external connections are on the back of the
TV.
For connection of other devices via SCART connector
(or RCA Jack) refer to the manuals of the related
devices.
Inserting batteries in the remote control
handset
 Remove the battery cover located on the back of the
handset by gently pulling upwards from the indicated
part.
 Insert two MN2400 AAA or equivalent type batteries
inside.
 Replace the battery cover.
NOTE: Remove batteries from remote control handset
when it is not to be used for a long period.Otherwise it
can be damaged due to any leakage of batteries.
Switching the TV ON/OFF
You can operate your TV either using the remote
control handset or directly using the TV onset
buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the
RED LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected,
or,
Press Programme Up and Down buttons on the front of
the TV or on the remote control respectively, so the TV
will switch on and the RED Led will turn GREEN.
To switch the TV off
 Press the stand-by button on the remote control, so
the TV will switch to stand-by mode and the GREEN
LED will become RED, or,
 Press the power button located on the front of the
TV.
Operating the TV
You can operate your TV both using the remote
control handset and onset buttons.
APS (Automatic Programming System)
When you turn on your TV for the first time, Auto Setup
menu will be displayed. Auto programming system
automatically programmes your TV according to the
transmission of programme systems in your area. In
this menu if the language setting is incorrect, use
or
buttons to highlight Languageand select the
available one using the
or buttons. Then use
the 
 or   buttons to highlight Country. If
country setting is in correct, use or buttons to
highlight Country, and select using the
or
buttons. Finally use 
 or   buttons to highlight
Startand use or buttons to begin Auto-
Programming.
After APS is finalised, a rank list will appear on the
screen. In the rank list you will see the programme
numbers and names assigned to the programmes. At
the first programme with programme number 1 will be
displayed and the programme number 1 will be
selected. Using
or or or key you
can move the flashing number and then display the
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CL2142AN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CL2142AN in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi CL2142AN

Hitachi CL2142AN User Manual - German - 20 pages

Hitachi CL2142AN User Manual - French - 24 pages

Hitachi CL2142AN User Manual - Italian - 21 pages

Hitachi CL2142AN User Manual - Swedish - 20 pages

Hitachi CL2142AN User Manual - Spanish - 23 pages

Hitachi CL2142AN User Manual - Norwegian - 22 pages

Hitachi CL2142AN User Manual - Finnish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info