Manual Hitachi CJ10DL (page 10 of 68) (English, German, Dutch, French, Italian, Portuguese, Spanish)

565908

Zoom out

Zoom in

1/68

English

SPECIFICATIONS

Power Tool

Model CJ10DL

No-Load Speed 0 – 2700 min

Stroke 13 mm

Capacity Wood: Depth 50 mm

Mild Steel Plate: Thickness 4 mm

Rechargeable battery BCL1015: Li-ion DC 10.8 V / 12 V Peak (1.5 Ah 3 cells)

Weight 1.2 kg

10. Do not use in a location where strong static

electricity generates.

11. If there is battery leakage, foul odor, heat

generated, discolored or deformed, or in any way

appears abnormal during use, recharging or

storage, immediately remove it from the equipment

or battery charger, and stop use.

CAUTION

1. If liquid leaking from the battery gets into your

eyes, do not rub your eyes and wash them well

with fresh clean water such as tap water and

contact a doctor immediately.

If left untreated, the liquid may cause eye-problems.

2. If liquid leaks onto your skin or clothes, wash well

with clean water such as tap water immediately.

There is a possibility that this can cause skin irritation.

3. If you find rust, foul odor, overheating, discolor,

deformation, and/or other irregularities when using

the battery for the first time, do not use and return

it to your supplier or vendor.

WARNING

If an electrically conductive foreign object enters the

terminals of the lithium ion battery, a short-circuit may

occur resulting in the risk of fire. Please observe the

following matters when storing the battery.

⅜ Do not place electrically conductive cuttings, nails,

steel wire, copper wire or other wire in the storage

case.

⅜ Either install the battery in the power tool or

store by securely pressing into the battery cover

until the ventilation holes are concealed to prevent

short-circuits (See Fig. 1).

Charger

Model UC10SFL

Charging voltage 10.8 V

Weight 0.35 kg

STANDARD ACCESSORIES

1 Blade (No. 41) ....................................... 1

CJ10DL

2 Blade (No. 123X) ................................... 1

(NN)

3 Hexagonal bar wrench ......................... 1

1 Blade (No. 41) ....................................... 1

2 Blade (No. 123X) ................................... 1

CJ10DL 3 Hexagonal bar wrench ......................... 1

(LCSK) 4 Battery (BCL1015) .................................. 1

5 Charger (UC10SFL) ................................ 1

6 Plastic case ............................................. 1

1 Blade (No. 41) ....................................... 1

2 Blade (No. 123X) ................................... 1

CJ10DL

3 Hexagonal bar wrench ......................... 1

4 Battery (BCL1015) .................................. 2

(2LCSK)

5 Charger (UC10SFL) ................................ 1

6 Plastic case ............................................. 1

7 Battery cover .......................................... 1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

1. Battery (BCL1015)

2. Blades

Various types of blades.

Refer to Table 2 for use of the blades.

Optional accessories are subject to change without

notice.

APPLICATIONS

⅜ Cutting various lumbers.

⅜ Cutting mild steel plates and aluminum plates.

⅜ Cutting synthetic resins, such as phenol resin and

vinyl chloride.

For details refer to the section entitled “SELECTION OF

BLADES”.

01Eng_CJ10DL_WE 8/3/09, 12:299

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CJ10DL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi CJ10DL Manual

Product: