110165

Hitachi CJ 120 VA Manual

12
Zoom out
Zoom in
Previous page
1/60
Next page
English
11
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 96 dB (A).
Measured A-weighted sound pressure level: 85 dB (A).
Uncertainty KpA: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Cutting wood:
Vibration emission value
ah, CW =
16.3 m/s
2
(CJ120V)
Uncertainty K = 4.5 m/s
2
Vibration emission value ah, CW =
16.5 m/s
2
(CJ120VA)
Uncertainty K = 1.5 m/s
2
Cutting sheet metal:
Vibration emission value
ah, CM =
13.8 m/s
2
(CJ120V)
Uncertainty K = 1.5 m/s
2
Vibration emission value ah, CM =
12.4 m/s
2
(CJ120VA)
Uncertainty K = 2.8 m/s
2
NOTE:
⅜
The minimum cutting radius of No. 1 (Long), No. 1 (Super Long), No. 21, No. 22 and No. 41 blades is 100 mm.
⅜
No. 1 (Long), No. 1 (Super Long), No. 11, No. 12, No. 15, No. 16, No. 21, No. 22 and No. 97 blades are sold separately.
Material
Blade
No. 1 No. 1
No.11
No. 12,
No. 15
No. 16,
No. 21 No. 22 No.41 No. 97
123X
to be cut
(Long)
(Super Long)
42 46
Material quality Thickness of material (mm)
Lumber
General lumber
Below Below 10 ∼ Below 10 ∼ 5 ∼ 10 ∼
105 135 55 20 55 40 65
Plywood
5 ∼ Below 5 ∼ 3 ∼
30 10 30 20
Iron plate
Mild steel plate
3 ∼ Below 2 ∼ 1.5 ∼
63 510
Stainless steel plate
1.5 ∼
2.5
Nonferrous
Aluminium copper,
3 ∼ Below Below
metal
brass
12 3 5
Aluminium sash
Height Height Height
up to up to up to
25 25 30
Plastics
Phenol resin, melamin, 5 ∼ Below 5 ∼ Below 5 ∼
resin, etc. 20 6 15 6 15
Vinyl chloride, 5 ∼ Below 5 ∼ Below 5 ∼ 3 ∼ 5 ∼
acryl resin, etc. 30 10 20 5 30 20 15
Foamed polyethylene, 10 ∼ 3 ∼ 5 ∼ 3 ∼ 10 ∼ 3 ∼ 5 ∼
foamed styrol 55 25 25 25 55 40 25
Pulp
Card board, 10 ∼ 3 ∼ 10 ∼ 3 ∼
corrugated paper 55 25 55 40
Hardboard
3 ∼ Below 3 ∼
25 6 25
Fiberboard
Below
6
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
WARNING
⅜ The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used.
⅜ Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling
instruction, to a Hitachi Authorized Service Center.
Table 1 List of appropriate blades
01Eng_CJ120V_WE 1/19/11, 4:10 PM11
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CJ 120 VA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CJ 120 VA in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info