661480
7
Zoom out
Zoom in
Previous page
1/136
Next page
7
English
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CH45Y/CH55Y/CH65Y: Hedge Trimmer
WARNING
To reduce the risk of injury, user must read
instruction manual.
Remove plug from the mains immediately if
cable is damaged or cut.
Do not expose to rain.
Clutch system:
Protects blades and gears when debris or large
branches stop the blades
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V
Rated voltage
Ensure that the power source to be utilized
conforms to the power requirements speci ed
on the product nameplate.
L
Blade size
P
Power Input
n
0
No-load speed
φ
max
Maximum cutting branch diameter
kg
Weight
(According to EPTA-Procedure 01/2003)
Guaranteed Sound power level
11
12
Operating procedure
Switching ON
Switching OFF
Disconnect mains plug from electrical outlet
WARNING
Class II tool
STANDARD ACCESSORIES
In addition to the main unit, the package contains the
accessories listed in the table below.
Blade case ....................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
Fine trimming hedges
Trimming and pruning garden trees
SPECIFICATIONS
The speci cations of this machine are listed in the Table on
page 4.
NOTE
Due to HITACHI’s continuing program of research and
development, the speci cations herein are subject to
change without prior notice.
NAMES OF PARTS (Fig. 1 – Fig. 5)
1
Rear switch
7
Blade case
2
Rear handle
8
Blade
3
Trigger switch
9
Name plate
4
Front switch
0
Cord holder
5
Front handle
!
Extension cord
(sold separately)
6
Protector
MOUNTING AND OPERATION
Action Figure Page
Removing and inserting the blade
case
22
Attaching an extension cord 3 2
Switch ON 4 2
Switch OFF 5 3
Selecting accessories 128
MAINTENANCE AND INSPECTION
WARNING
Be sure to turn the tool o and the plug is disconnected
from the receptacle before making inspections or
carrying out maintenance.
Do not disassemble to blade. Failure to heed this
warning may result in injury.
Use gloves, or cloth to protect your hands when handling
the blade. Failure to heed this warning may result in
injury.
1. Cleaning and lubricating the cutting blade
After use, remove contamination, remains of blades etc.
(e.g. with a brush or cloth)
And then, carefully lubricate the blade with oil for rust-
proo ng. When lubricate the blade, always use genuine
Hitachi oil (code No. 371303) or spray (code No. 371304)
with the number speci ed in the selecting accessories.
0000Book_CH45Y.indb 70000Book_CH45Y.indb 7 2017/03/15 9:52:322017/03/15 9:52:32
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CH55Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CH55Y in the language / languages: All languages as an attachment in your email.

The manual is 8,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info