Manual Hitachi CG51EA (page 66 of 112) (English, German, Dutch, French, Italian, Spanish)

563803

Zoom out

Zoom in

1/112

Operation

Trimmer/Brushcutter Operating Position

【CG23EA(SL), CG32EA(SL), CG42EA(SL), CG51EA(SL)】

Before using the Trimmer/Brushcutter, check the following:

1. The operator must be wearing the shoulder hanging strap/shoulder harness attached to

the Trimmer/Brushcutter, and the Trimmer/Brushcutter must be on the operator’s right

side.

2. The operator’s right hand should be holding the shaft grip, with the fingers on the throttle

trigger. The right arm should be slightly bent.

3. The left hand should be holding the loop handle with the fingers and thumb fully enclosed

around the grip. The left arm may be extended.

4. The Trimmer/Brushcutter weight should be evenly distributed between the arms. The

cutting attachment should be near and parallel to the ground.

5. Accelerate and hold the engine at cutting speed before entering the grasses to be cut.

6. Always release the throttle trigger and allow the engine to return to idle speed when not

cutting.

7. Stop the engine when moving between work sites.

【CG32EA, CG42EA, CG51EA】

Before using the Trimmer/Brushcutter, check the following:

1. The operator must be wearing the shoulder harness attached to the Trimmer/Brushcutter,

and the Trimmer/Brushcutter must be on the operator’s right side.

2. The operator’s right hand should be holding the right-hand horn handle grip, with the

fingers on the throttle trigger.

3. The left hand should be holding the left-hand horn handle grip with the fingers and thumb

fully enclosed around the grip.

4. Accelerate and hold the engine at cutting speed before entering the grasses to be cut.

5. Always release the throttle trigger and allow the engine to return to idle speed when not

cutting.

6. Stop the engine when moving between work sites.

• If the cutting attachment becomes jammed, stop the engine immediately.

• Make certain all moving parts have stopped and disconnect the spark plug before

inspecting the equipment for damage.

• Never use a Trimmer/Brushcutter that has chipped, cracked or broken cutting attachment

or guard.

WARNING

POTENTIAL HAZARD

• Foreign objects can be thrown by Trimmer/Brushcutter.

WHAT CAN HAPPEN

• Contact with thrown objects can cause personal injury.

HOW TO AVOID THE HAZARD

• Never operate the Trimmer/Brushcutter without the cutting attachment

guard in place

【CG42EA, CG51EA】

【CG23EA(SL), CG32EA(SL),

CG42EA(SL), CG51EA(SL)】

【CG32EA】

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CG51EA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi CG51EA Manual

Product: