Manual Hitachi CG32EA (page 94 of 112) (English, German, Dutch, French, Italian, Spanish)

563799

Zoom out

Zoom in

1/112

Fehlersuche und –behebung

Problem Ursache Behebung

Der Motor startet

nicht.

Motor hat keinen

Leerlauf

Motor hat nicht

genügend Kraft oder

stirbt während des

Schneidens ab.

•

Der Ausschalter steht auf "OFF"

• Der Tank ist leer

• Der Zünder war nicht

ausreichend gedrückt

• Motor stirbt ab (durch zuviel

oder zuwenig Treibstoff)

• Leerlaufgeschwindigkeit nicht

richtig eingestellt

• Beschleunigungsdraht ist lose

• Luftfilter ist verschmutzt

• Den Schalter auf "ON" stellen

• Treibstoff tanken

• Zünder betätigen, bis

Treibstoff durch den Schlauch

fließt

• Prozedur des Wiederstartens

durchführen

•

Leerlaufgeschwindigkeit

einstellen

• Beschleunigungsdraht

straffen

• Luftfilter reinigen

Für weitere Unterstützung setzen Sie sich bitte mit Ihrem örtlichen Hitachi Händler in

Verbindung.

Solution des problèmes

Problem Origine Solution

Le moteur

ne démarre pas.

Le moteur ne

maintient

pas le ralenti.

Le moteur manque

depuissance ou cale

lorsque vous coupez

de l’herbe.

• Le bouton d’arrêt est placé

dans la position « off ».

• Le réservoir de carburant est

vide.

• Le bulbe d’amorçage n’a pas

été suffisamment actionné

• Le moteur s’est noyé.

• Leerlaufgeschwindigkeit nicht

richtig eingestellt

• Le câble de l’accélérateur

s’est détendu.

• Le filtre à air est sale

• Placez le bouton d’arrêt dans

la position « on ».

• Remplissez le réservoir de

carburant.

• Actionnez le bulbe

d’amorçage jusqu'à ce que

l’essence passe à travers le

tuyau de retour du carburant

• Suivez la procédure de

démarrage à chaud.

• Établissez la vitesse du

ralenti.

• Resserrez le câble de

l’accélérateur.

• Nettoyez ou remplacez le filtre

à air.

Si une assistance supplémentaire est requise, consultez votre réparateur HITACHI le

plus proche.

Troubleshooting

If further assistance is required, contact your local HITACHI service dealer.

Problem Cause Action

Engine will not start

Engine will not Idle

Engine lacks power or

stalls when cutting

• STOP switch set to off position

• Empty fuel tank

• Primer bulb wasn’t pushed

enough

• Engine flooded

• Idle speed set incorrectly

• Throttle wire has come loose

• Dirty air filter

• Move switch to on position

• Fill fuel tank

• Press primer bulb until fuel

flows through fuel return line

• Use warm engine starting

procedure

• Set Idle speed

• Tighten throttle wire

• Clean or replace air filter

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CG32EA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi CG32EA Manual

Product: