563799
72
Zoom out
Zoom in
Previous page
1/112
Next page
71
GB
Cutting with Nylon Trimmer Line
• The nylon Trimmer Line is used for cutting grass. When cutting brush, use the Brushcutter
Blade.
• The tip of the line does the cutting. The line should stay extended while cutting. Hold the
bottom of the trimmer head about 5 cm above the ground. (A: Correct)
• Do not force the line into the material. Forcing the line will cause it to slap against the
grasses, increasing line usage and causing poor cutting results. (B: Incorrect)
WARNING
POTENTIAL HAZARD
• Use of improper line could cause line to break and be thrown in operator’s
or bystander’s direction.
WHAT CAN HAPPEN
• Use of improper line could result in serious personal injury.
HOW TO AVOID THE HAZARD
• Use only good quality, commercial grade, weld resistant trimmer line with a
diameter of 2,4 mm.
• Do not use any type of wire or other string-like substance. Do not use
metal-reinforced line.
D
Schneiden mit der Nylonschnur
• Die Nylonschnur wird zum Schneiden von Gras benutzt. Zum Schneiden von Gebüsch
verwenden Sie das Gestrüppschneidemesser.
• Das Schneiden wird vom Ende der Schnur durchgeführt. Die Schnur sollte während des
Schneidens immer straff sein. Halten Sie die Unterseite des Trimmerkopfes etwa 5 cm
über dem Boden (A: richtig)
• Zwingen Sie die Schnur nicht in das Material. Dies führt dazu, dass die Leine gegen das
Gras schlägt, was die Schnurabnutzung erhöht und das Schneideergebnis vermindert (B:
falsch)
WARNUNG
MÖGLICHE GEFAHR
• Die Benutzung einer ungeeigneten Schnur kann dazu führen, dass diese
reißt und in Richtung des Benutzers oder umstehender Personen
geschleudert wird.
WAS PASSIEREN KANN
• Die Benutzung einer ungeeigneten Schnur kann zu ernsthaften
Verletzungen führen.
WIE DIE GEFAHR VERMIEDEN WIRD
• Benutzen Sie nur handelsübliche Trimmerschnüre guter Qualität mit einem
Durchmesser von 2,4 mm.
• Benutzen Sie keine Drähte oder andere schnurähnliche Mittel. Benutzen
Sie keine metalldurchzogenen Schnüre.
(A)
5cm
(B)
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CG32EA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CG32EA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info