563769
40
Zoom out
Zoom in
Previous page
1/64
Next page
Nederlands
40
WAARSCHUWING
Geeft aan dat er een verhoogd risico bestaat op ernstig
persoonlijk letsel of zelfs de dood als de aanwijzingen niet
worden opgevolgd.
LET OP
Geeft aan dat er risico bestaat op persoonlijk letsel of
zaakschade als de aanwijzingen niet worden opgevolgd.
OPMERKING
Nuttige informatie voor correct functioneren en gebruik van de
machine.
LET OP
Demonteer de trekstarter niet. Het risico bestaat dat u gewond
raakt doordat de veer van de trekstarter losschiet.
SPECIFICATIES
Model
CG25EUS
CG25EUS (L)
Motorinhoud (m)25
Bougie
NGK CMR5H of
soortgelijk
Inhoud brandstoftank
()
0,55
Hoeveelheid
motorolie (m)
80
Droog gewicht (kg)
CG2 5 EUS .........5, 2
CG25EUS (L) ...5,0
Geluidsdrukniveau
LpA (dB (A))
(EN27917)
81,8 78,6
Gemeten
geluidsdrukniveau
LwA (dB (A))
Gegarandeerd
geluidsdrukniveau
LwA (dB (A))
101,8 98,6
104 101
Model
CG25EUS
CG25EUS (L)
Trillingsniveau (m/s
2
)
(ISO7916)
CG25EUS
Linker
handgreep
Rechter
handgreep
CG25EUS (L)
Voorste
handgreep
Achterste
handgreep
4,8 5,4
4,7 4,8
4,8 4,5
3,2 4,6
OPMERKING
Gelijkwaardige geluidsniveaus/trillingsniveaus zijn berekend
als de tijdgewogen energiesom van de geluids-/trillingsniveaus
onder verschillende werkomstandigheden met de volgende
tijdsindeling: 1/2 stationair, 1/2 max. toerental.
* Alle gegevens kunnen zonder kennisgeving gewijzigd worden.
MONTAGEPROCEDURES
Aandrijfas aan motor monteren (Afb. 1)
Draai de vergrendelschroef (1) los zodat de schroefpunt niet hindert
bij het aanbrengen van de aandrijfas. Als u de aandrijfas aanbrengt,
laat de vergrendelschroef dan naar buiten wijzen om te voorkomen
dat hij binnenin hindert.
Schuif de aandrijfas in de koppelingsbehuizing van de motor totdat
de gemarkeerde positie (2) op de aandrijfas de behuizing bereikt.
OPMERKING
Als het moeilijk is om de aandrijfas tot aan de gemarkeerde
positie te schuiven, draait u de aandrijfas aan het snij-uiteinde
met de klok mee of tegen de klok in. Steek de vergrendelschroef
in het gat van de asbehuizing en draai hem vast. Draai
vervolgens de klemschroef (3) stevig vast.
Montage van het handvat
WAARSCHUWING
Als u stalen/onbuigzame mesbladen gebruikt voor rechte zeisen
of bosmaaiers, gebruik dan altijd een beschermingsstang (4) en
een schouder-draaggordel samen met het lushandvat. (Afb. 2)
Bevestig het handvat aan de aandrijfas met de hoek in de richting
van de motor.
Plaats het handvat zodanig dat het in de meest comfortabele positie
staat om te werken.
OPMERKING
Als er een handvatlabel op de aandrijfasbehuizing van uw
machine is, volg dan de aanwijzing op het label.
Verwijder de handvatklem (5) van de machine. (Afb. 3)
Plaats de handvaten en bevestig de handvatklem lichtjes met de
vier schroeven. Breng in de juiste positie. Draai de schroeven
vervolgens stevig vast.
Bevestig de beschermhuls aan de aandrijfas of het handvat met de
snoerklemmen (6). (Afb. 4)
Gaskabel/stopsnoer (Afb. 6)
Verwijder de lucht lterkap. (Afb. 5)
Verbind de stopsnoeren. (Afb. 7)
Als het kabeluiteinde van de gashendel (7) op de machine ligt,
schroef het dan helemaal in de steun voor de kabelinstelling (8) en
bevestig het kabeluiteinde met behulp van de stelmoer (9) aan de
steun voor de kabelinstelling (8).
000Book_CG25EUS_WE.indb 40000Book_CG25EUS_WE.indb 40 2009/12/25 21:39:102009/12/25 21:39:10
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CG25EUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CG25EUS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info