Manual Hitachi C8FSE (page 19 of 148) (All languages)

661468

Zoom out

Zoom in

1/148

English

SPECIFICATIONS

Max. Cutting

Capacity

Height × Width

0°

65 mm × 312 mm

**75 mm × 262 mm with aux. board (30 mm)

Miter 45°

65 mm × 220 mm

**75 mm × 185 mm with aux. board (20 mm)

Bevel

Left 45°

45 mm × 312 mm

**50 mm × 252 mm with aux. board (30 mm)

Right 5°

60 mm × 312 mm

**70 mm × 252 mm with aux. board (30 mm)

Compound

Bevel (Left) 45° + Miter 45°

45 mm × 220 mm

**50 mm × 170 mm with aux. board (30 mm)

Bevel (Right) 5° + Miter 45°

60 mm × 220 mm

**70 mm × 170 mm with aux. board (30 mm)

Saw Blade Dimensions (oD × iD × Thickness) 216 mm × 30 mm × 2 mm

Miter Cutting Angle Right 0° – 57°, Left 0° – 45°

Bevel Cutting Angle Right 0° – 5°, Left 0° – 48°

Compound Cutting Angle

Bevel (Left) 0° – 45°

Miter (Right and Left) 0° – 45°

Bevel (Right) 0° – 5°

Voltage (by areas)*

(110 V, 230 V)

Power Input* 1050 W

No-Load Speed

C8FSHE • C8FSE: 5500 min

–1

C8FSHE(S) • C8FSE(S): 4100 min

–1

: with Soft Start

Machine Dimensions (Width × Depth × Height) 555 mm × 790 mm × 485 mm

Weight (Net)

14.5 kg (C8FSHE • C8FSHE(S)) /

14 kg (C8FSE • C8FSE(S))

Laser Marker

(Only Model C8FSHE / C8FSHE(S))

Maximum output

Po<3 mW Class

Laser Product

(Iambda) 654 nm

Laser medium Laser Diode

* Be sure to check the nameplate on product as it is subject to change by areas.

When cutting the workpiece which has the dimension of “**” there might be some possibility of the lower end of the circular

saw to touch with the workpiece, even if the motor head is located at the lower limit position. Pay attention when cutting the

workpiece. For further details, refer to “PRACTICAL APPLICATIONS”. Mount the auxiliary board on the fence surface (Refer

( ) the thickness of auxiliary board). Refer to “10. Cutting large workpieces” (Fig. 20, 21).

1. Minimum size of the workpiece.

All workpieces that can be clamped left or right from the saw blade with the supplied vise assembly.

Model C8FSHE • C8FSHE(S) • C8FSE • C8FSE(S): 245 × 90mm (length × width)

2. Maximum cutting depth.

Model C8FSHE • C8FSHE(S) • C8FSE • C8FSE(S): 65mm (Miter 0° × Bevel 0°)

PRIOR TO OPERATION

CAUTION

Make all necessary adjustments before inserting the

plug in the power source.

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements speciﬁ ed on the product

nameplate.

Do not use with direct current, or transformers such as

boosters. Doing so may result in damage or accidents.

2. Power switch

Ensure that the power switch is in the OFF position. If the

plug is connected to a receptacle while the trigger switch

is in the ON position, the power tool will start operating

immediately, inviting serious accident.

3. Extention cord

When the work area is removed from the power source,

use an extension cord of suﬃ cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

STANDARD ACCESSORIES

○ 216 mm TCT Saw blade (mounted on tool) ...................1

○ Dust bag .......................................................................1

○ 10 mm Box wrench .......................................................1

○ Vise Assembly ..............................................................1

○ Holder ...........................................................................1

○ Side Handle ..................................................................1

○ Sub Fence (mounted on tool) ........................................1

Standard accessories are subject to change without notice.

APPLICATION

Cutting various types of aluminium sash and wood.

0000Book_C8FSHE.indb 190000Book_C8FSHE.indb 19 2017/03/23 12:13:002017/03/23 12:13:00

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C8FSE in the language / languages: All languages as an attachment in your email.

The manual is 6,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi C8FSE Manual

Product: