Manual Hitachi C8FS (page 7 of 35) (English, German, Dutch, French, Italian, Spanish)

506043

Zoom out

Zoom in

1/35

English

10. Replace table insert when worn.

11. Do not use the saw to cut other than aluminium,

wood or similar materials.

12. Connect slide compound saw to a dust collecting

device when sawing.

13. Take care when slotting.

14. When transporting or carrying the tool, do not

grasp the holder. Grasp the handle instead of the

holder.

15. Start cutting only after motor revolution reaches

maximum speed.

16. Promptly cut OFF the switch when abnormality

observed.

17. Shut off power and wait for saw balde to stop

before servicing or adjusting tool.

18. During slide cutting operation, the saw must be

pushed and slided away from the operater.

19. During a miter or bevel cut the blade should not

be lifted until it has stopped rotation completely.

SPECIFICATIONS

0° 65mm × 305mm

Miter 45° 65mm × 220mm

Bevel 45° 45mm × 305mm

Miter + Bevel 45° 45mm × 220mm

Saw Blade Diameter 216mm

Miter Cutting Angle Right and left 0° – 57°

Bevel Cutting Angle Left 0° – 47°

Input 920W*

No-Load Speed 5000/min

Machine Dimensions (Width × Depth × Height) 660mm × 1150mm × 465mm

Weight (Net) 25 kg

* Be sure to check the nameplate on product as it is subject to change by areas.

Max. Cutting

Capacity

Height x Width

STANDARD ACCESSORIES

(1) 216 mm TCT Saw blade (mounted on tool) ..... 1

(2) Dust bag .................................................................... 1

(3) 10 mm Box wrench ................................................ 1

(4) Vise Assembly .......................................................... 1

(For England, France, Italy, Singapore)

(5) Sub Table (with four M8 flat screws) ................. 1

(For England, France)

Standard accessories are subject to change without

notice.

Standard accessories are subject to change by areas.

OPTIONAL ACCESSORIES (SOLD SEPARATELY)

(1) Guide Assembly

Optional accessories are subject to change without

notice.

APPLICATION

⅜ Cutting various types of wood.

UNPACKING

⅜ Carefully unpack the power tool and all related items

(standard accessories).

⅜ Check carefully to make certain all related items

(standard accessories) are present.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is conencted to a receptacle while the trigger

switch is in the ON position, the power tool will start

operating immediately, inviting serious accident.

3. Extention cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be kept

as short as practicable.

4. When the tool is shipped, its movable parts are locked

by the locking pin. Move the handle a little and remove

the locking pin by pulling it as illustrated in Fig. 2.

5. Attach the dust bag to the main unit (Fig. 1).

6. Assembly of sub table.

Assembling the sub table using the four 8 mm flat

screws (Fig. 4).

ADJUSTING THE POWER TOOL PRIOR TO USE

CAUTION

Make all necessary adjustments before inserting the plug

in the power source.

1. Check to see that the safety cover operates smoothly.

(1) When push down the handle while holding down the

lever, check that the safety cover revolves smoothly

(Fig. 3).

(2) Next, check that the safety cover returns to the original

position when the handle is raised.

2. Saw blade height adjustment (Fig. 2).

The main unit has as standard equipment a saw blade

with an outer diameter of 216 mm and adjustable

cutting depth. Follow the steps outlined below of

adjustment when using a saw-blade with an outer

diameter which is greater than 216 mm.

I need some parts to my SAW, IT is a Hitachi C 8FS ( not C 8FSE ). I think the name is LINER and It is 3 pieces. Part number is maybe 74. Submitted on 2-2-2022 at 20:27
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C8FS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi C8FS Manual

Product: