Manual Hitachi C32WD2TN2 (page 15 of 32) (English)

54259

Zoom out

Zoom in

1/32

The Speaker Configuration menu allows the user to access various centre speaker modes. This is particularly useful

if an external amplifier is connected to the Centre PHONO Socket. In addition to these options, you may want to

replace the TV’s internal speaker sound to a full external amplified speaker setup. In this case the user can mute the

TV’s speakers from within the Speaker Configuration Menu, allowing sound only to be heard through the external

amplified sound sources. Follow the step by step guide below:

Follow the guide below describing options with and without external amplifiers connected:

Option 1: (PHANTOM)

If you do not have any external

amplifiers connected to the TV then select the PHANTOM

mode permanently. Phantom allows the TV to create centre

dialogue information using the TV’s left and right internal

speakers.

(NORMAL and WIDE have no effect when there

are no external centre amplifiers connected [See Notes

below]).

Option 2: (PHANTOM)

If there are external surround

amplifiers connected but no centre amplifier connected,

then select PHANTOM mode. This again allows the TV to

create centre dialogue information using the left and right

internal speakers.

(NORMAL and WIDE have no effect when there are no

external centre amplifiers connected [See Notes below]).

Option 3: (NORMAL)

In option 3, it is presumed the user

has a limited bass response centre amplifier connected. If

you feel that this best describes your setup then select

NORMAL. This mode will anchor dialogue to your centre

amplifier whilst relaying bass response through the TV’s

internal left and right speakers

[See Note below]

Option 4: (WIDE)

This option assumes there is a good

bass response centre amplifier connected to your TV. If this

option describes your setup then select WIDE from the

Speaker Configuration Menu. In this mode all bass response

and dialogue is fed to the centre amplifier

[See Notes

below]

Speaker Configuration Menu

Speaker Configuration Menu - note the dis-

played information window, this briefly

describes the mode you have selected.

Press 'MENU' button

to exit

Set

'Centre Channel' option

to PHANTOM

Set

'Centre Channel' option

to NORMAL or WIDE

Do you have an external

CENTRE

Speaker

YES

Select 'Speaker Config.'

using the up/down keys.

Now follow guide below

Do you have external

LEFT and RIGHT

Speakers

YES

Set

'Mute Internal Speakers?'

to off i.e.

Set

'Mute Internal Speakers?'

to on i.e. ✓

Highlight 'Speaker Config.'

using the up/down keys

Select INSTALL using the

right/left buttons

Highlight INSTALL using the

up/down buttons

Use up/down buttons to select

'Dolby Pro Logic'.

Highlight 'Sound Mode' using

the up/down handset buttons.

Select 'Sound Mode' using

the left/right handset buttons.

Press the Menu key

(until Main Menu appears).

De-activate the 3DS system

( see page 14 )

Now press MENU key to exit to

Main Menu

Press & Hold MENU button to view

Main Menu with INSTALLATION.

PLEASE NOTE:

In 2 speaker mode i.e. using only internal TV

speakers with 3DS activated, the CENTRE

channel option will display PHANTOM and

cannot be changed to any other mode.

Whilst in HALL or STEREO modes the ‘Centre

Channel’ option displays ‘OFF’, and also

cannot be changed to any other mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C32WD2TN2 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi C32WD2TN2 Manual

Product: