54259
10
Zoom out
Zoom in
Previous page
1/32
Next page
Manual Tuning cont.
Manual Tuning cont.
When AV sockets are commonly used, for example, if you view camcorder
recorded events frequently, then we suggest assigning a dedicated pro-
gram number on your TV. This can be any program number that has not
already been assigned. Follow the step by step guide below.
Assigning AV Prog. Nºs
Assigning AV Prog. Nºs
Broadcasting stations transmit the signal to your TV on a particular defined
frequency i.e. 525.25MHz. These frequencies can be entered manually if
known, and you can obtain this information by calling your local operator. In
addition to frequency transmission a corresponding CHANNEL Nº is also used e.g. CH34, and this too can be directly
input to your TV if known. (The S-- number has no function on this TV).
10
10
AV2 assigned to Program 6
Press and HOLD the MENU button until
Main Menu with INSTALL is shown. Use up/down
buttons to highlight INSTALL - select by
pressing the left/right buttons.
Use the left/right/up/down buttons to high-
light the frequency of the program number
you wish to enter.
Press the ‘CH’ button on your hand-
set once - the column changes
RED to indicate selection.
1
3
4
Repeatedly press CH key to select
CH- - or ---.--, and enter the
known number using 0-9 keys.
Once the number has been entered,
press the MENU key once more and
the display turns BLUE. This is now
stored. Press MENU to exit.
5
6
Repeat above to enter other AV sock-
ets or repeatedly press MENU button
to store and exit to TV mode.
6
Entering Known Frequencies
Entering Known Frequencies
Use up/down buttons to highlight
MANUAL TUNE, select by using the
left/right buttons.
2
Use up/down buttons to highlight
MANUAL TUNE, select by using the
left/right buttons.
2
Use the left/right/up/down buttons to
highlight the AV column of the program
number you wish to use.
3
Once highlighted press the ‘CH’
button to allow changes to be
entered.
4
Select between each AV mode
using the left/right buttons
5
Press and HOLD the MENU button until
Main Menu with INSTALL is shown. Use up/down
buttons to highlight INSTALL - select by
pressing the left/right buttons.
1
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C32WD2TN2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C32WD2TN2 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info