Once the number has been entered, press the
MENU key once more and the display turns
BLUE. This is now stored. Press MENU to exit.
Repeatedly press CH key to select CH- - or ---.--,
and enter the known number using 0-9 keys.
Manual T
Manual T
uning cont.
uning cont.
Broadcasting stations transmit the signal to your TV on a particular defined fre-
quency i.e. 525.25MHz. These frequencies can be entered manually if known, and
you can obtain this information by calling your local operator. In addition to frequency transmission a corresponding CHANNEL Nº
is also used i.e. CH34, and this too can be directly input to your TV if known. (The S-- number has no function on this TV).
Entering Known Frequencies
Entering Known Frequencies
When AV sockets are commonly used, for example, if you view camcorder record-
ed events frequently, then we suggest assigning a dedicated program number on your TV. This can be any program number that
has not already been assigned. Follow the step by step guide below.
Assigning
Assigning
A
A
V Prog. Nºs
V Prog. Nºs
Press the CH key (23) on your handset once,
the column changes RED to indicate selection.
Use cursor keys 17,18, 19 or 21 to highlight the
frequency of the program number you wish to enter.
Press and HOLD MENU key (20) and select INSTALL.
Select MANUAL TUNE from INSTALL menu.
Repeat above to enter other AV sockets or repeatedly
press MENU key (20) to store and exit to TV mode.
Once highlighted press the CH key (23) and select
between each AV mode using cursor keys 18 or 19.
Use cursor keys 17,18, 19 or 21 to highlight the AV
column of the program number you wish to assign.
Press and HOLD MENU key (20) and select INSTALL.
Select MANUAL TUNE from INSTALL menu.
Page12
Page12
