54275
15
Zoom out
Zoom in
Previous page
1/21
Next page
GB - 14 -
Go to the Tuning menu and using the or buttons
select Fine Tuning. Then press and hold the 
 button will
cause the fine tuning to be carried out in the forwards direc-
tion, pressing the
button with cause the tuning to be
carried out in the opposite direction. When you are satisfied
with the reception of the transmission store it. To store, se-
lect STORE using the
or buttons and store it by
pressing either of the 
 or  buttons.
When you select "Frequency" , the display of the Tuning
menu will be as below :
As "Frequency" is selected, TV will search according to
the channel frequencies.
With the
or  button, select Search. Search can be
made either forward, pressing
button or backwards,
pressing
button.
The search will be done with steps of 0.25MHz. in each
step.
 If the tuned station is not the desired one, you can continue
searching pressing
or button again.
When the desired station is tuned, select Store using
or   button and store it to the programme number
you selected pressing 
 or  button.
Now as you had selected the "Frequency", the tuning
mode of the program is stored as Frequency Search Mode.
Direct Frequency Access
 If you know the broadcast band and the channel frequency
of the station you want to tune, you do not need to make
search; select Frequency, using 
 or  button in the
Frequency Mode Tuning Menu. You can type the first 3 dig-
its of the frequency using the digit buttons, and then you
can select the decimal part of the frequency by using 
or
buttons with 250kHz steps. For example if you
want to tune the station at frequency 224.25 MHz; first you
can directly type 224. The bar at bottom of the menu will
show 224.00 . Then by increasing or decreasing with 0.25
MHz steps using
 or   buttons, you can select the
224.25MHz .When you type and select the frequency, the
corresponding station will be displayed.
 To store the station to the programme number selected, se-
lect Store option using
or button and then
press 
 or   button to store it.
Now as you had selected the Frequency, the tuning
mode of the program is stored as Frequency Search Mode.
Manual Setup
The Manual Setup Menu displays the programme names
and numbers. You can use this menu to delete or insert a
channel and to auto store the programmes. This menu can
be accessed directly via the
INFO button provided the
TV is not already displaying a menu.
The Manual Setup Menu can be reached via Install in the
Main Menu.
Press the Blue button on the remote control handset this will
display the Install menu then select Manual Setup using
the
or buttons. Next press either of the or
 buttons.
When you have entered the Manual Setup all the pro-
gramme names and numbers will be displayed on the screen.
Programme number one (1) will be in red and flashing while
all the others are in white. By using the 
 or   buttons
you can move the flashing display to select another pro-
gramme number and name.
Pressing the RED button on the remote control will retune the
channel on the flashing programme number.
To delete a channel from a programme number:
 To move the red flashing display on to the channel you want
to delete.
Press the YELLOW BUTTON on the remote control. Now
the channel will be deleted and all the other channels below
this programme number will be moved up one position.
To insert a channel into a programme number:
 Move the red flashing display on to the channel you want to
insert.
 Press the RED BUTTON on the remote control. That chan-
nel will now be displayed on the screen.
 Move the red flashing display on to the required programme
number position.
 Press the GREEN BUTTON on the remote control this will
insert the channel shown on the screen into that programme
number position. The channel that was occupying that posi-
tion will be moved down one and the position from where the
selected channel was moved from will be filled by the chan-
nel below.
APS (Automatic Programming System)
The APS menu appears when you switch on your TV for the
first time.
APS automatically tunes your TV into the TV channels re-
ceived in your area.
If you wish to run the APS at another time you will have to do
the following.
Press the BLUE button on the remote control handset this
will display the Install menu then select MANUAL SETUP
using the
or buttons. Next press either of the
 or  buttons.
 You are now in the MANUAL SETUP menu.
 Press the BLUE button on the remote control handset. This
will select AutoTune and start APS. (Pressing the TV button
on the remote control can stop this operation.)
IB-ENG-PLL-STEREO-AK33-UK-(C28WF540N-C32WF540N-28&3217W).p65 29.08.2002, 13:0714
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C28WF540N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28WF540N in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info