54275
9
Zoom out
Zoom in
Previous page
1/21
Next page
GB - 8 -
Before Switching on your TV
Power connection
IMPORTANT: The TV set is designed to operate on 220-240V
AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room
temperature before you connect the set to the mains.
Aerial Connections
 Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect other devices
IMPORTANT: Switch off the TV before connecting any exter-
nal device.
Sockets for external connections are on the back of the TV.
For connection of other devices via SCART connector (or
RCA Jack) refer to the manuals of the related devices.
Inserting batteries in the remote control handset
 Remove the battery cover located on the back of the hand-
set by gently sliding it in the direction shown below.
 Insert two AAA (R03) or equivalent type batteries inside.
 Replace the battery cover.
Note: Remove the batteries from the remote control handset
when it is not going to be used for a long time. Otherwise it
could be damaged if the batteries leak.
Switching the TV ON/OFF
You can operate your TV either using the remote control
handset or directly using the buttons on the TV.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV. Then
the TV switches itself to standby mode and the RED LED lo-
cated below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a pro-
gramme number is selected,
or,
Press Programme Up and Down buttons on the front of the
TV or on the remote control respectively, so the TV will
switch on and the RED Led will turn GREEN.
To switch the TV off
 Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED, or,
 Press the power button located on the front of the TV.
Operating the TV
You can operate your TV in two ways. First by using the
remote control handset and second by using the controls
on the TV.
APS (Automatic Programming System)
The Auto programming system automatically programmes
your TV according to the correct transmission system in your
area.
When you turn on your TV for the first time, the "Auto Setup''
menu will be displayed. In this menu if the language setting is
incorrect, use either
 or buttons to highlight "Lan-
guage'' and select the most suitable language using the
or  buttons. Then use either of the  or
buttons to highlight "Country". If the country setting is incor-
rect, use either of the
or buttons to select the
correct one. Finally use
or buttons to highlight
"Start" and press either of the 
 or   buttons to start
the "Auto-Programming''. The "Auto-Programming sys-
tem'' (APS) can be cancelled by pressing the "TV'' button lo-
cated on the remote control handset.
When the APS has finished a table of stored stations will be
displayed on the screen with number 1 highlighted in red. In
the table you will see programme numbers and names as-
signed to the stations, they will be listed in a predetermined
order.
If you wish to check the stations press the "
" button to
move the red flashing number and name down to the pro-
gramme you wish to view and press the red button on the re-
mote control hand set to select the programme.
If you would like to change the order of the table, you can
rearrange it. To rearrange the table, press the menu button
to display the install menu, then in the install menu select
the TUNING menu. To use the Tuning menu please refer to
the Tuning sub menu section that is located in the install
menu part of this manual.
After selecting the Tuning Mode if you want to start APS, by
pressing the 
 or   buttons, come to the Start item
and by pressing 
 or  button start the APS.
IB-ENG-PLL-STEREO-AK33-UK-(C28WF540N-C32WF540N-28&3217W).p65 29.08.2002, 13:068
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C28WF540N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28WF540N in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info