54237
17
Zoom out
Zoom in
Previous page
1/22
Next page
GB - 16 -
0.25 MHz steps using “ or buttons, you can
select the 224.25MHz .When you type and select the
frequency, the corresponding station will be displayed.
To store the st ation to the programme number se-
lected, select “Store” option using or “ but-
ton and then press “ or “ button to store it.
Now as you had selected the “Frequency Search,
the tuning mode of the program is stored as Fre-
quency Search Mode.
Manual Setup
The Manual Setup Menu displays the programme
names and numbers. You can use this menu to delete
or insert a channel and to auto store the programmes.
This menu can be accessed directly via the INFO
button provided the TV is not already displaying a menu.
The Manual Setup Menu can be reached via Install in
the Main Menu.
Press the Blue button on the remote control handset this
will display the Install menu then select Manual Setup
using the or buttons. Next press either of the
“ or “ buttons.
When you have entered the Manual Setup all the pro-
gramme names and numbers will be displayed on the
screen. Programme number one (1) will be in red and
flashing while all the others are in white. By using the
“ or buttons you can move the flashing display
to select another programme number and name.
Pressing the RED button on the remote control will re-
tune the channel on the flashing programme number.
To delete a channel from a programme number:
To move the red flashing display on to the channel
you want to delete.
Press the YELLOW BUTTON on the remote con-
trol. Now the channel will be deleted and all the other
channels below this programme number will be
moved up one position.
To insert a channel into a programme number:
Move the red flashing display on to the channel you
want to insert.
Press the RED BUTTON on the remote control.
That channel will now be displayed on the screen.
Move the red flashing display on to the required pro-
gramme number position.
Press the GREEN BUTTON on the remote control
this will insert the channel shown on the screen into
that programme number position. The channel that
was occupying that position will be moved down one
and the position from where the selected channel
was moved from will be filled by the channel below.
APS (Automatic Programming System)
The APS menu appears when you switch on your TV for
the first time.
APS automatically tunes your TV into the TV channels
received in your area.
If you wish to run the APS at another time you will have
to do the following.
Press the BLUE button on the remote control hand-
set this will display the Install menu then select
MANUAL SETUP using the or ” buttons.
Next press either of the “ “ or “ ” buttons.
You are now in the MANUAL SETUP menu.
Press the BLUE button on the remote control hand-
set. This will select AutoTune and start APS. (Press-
ing the TV button on the remote control can stop this
operation.)
When APS has finished a table of all the channels tuned
in will be displayed on the screen. If you are not happy
with the line up of the channels this can be changed.
Please refer to the section on how to delete and insert
a channel from a programme number located in the
MANUAL SETUP section.
If you do not want the stations to be stored automati-
cally, cancel APS pressing “TV” button.
If you want to continue, then first by pressing the
or buttons, come to the “Tuning Mode item
and select the mode at which your TV will run the
APS. If you select Channel Tuning Mode, APS will run
according to Channel Tuning Mode and will auto-
search according to the Channel numbers of the sta-
tions in your area. If you select Frequency T uning
Mode, APS will run according to Frequency Tuning
Mode and will auto-search according to the frequen-
cies of the stations in your area. Selected tuning
mode will appear in the highlightened bar at the bot-
tom of the WARNING menu.
Then, after selecting the Tuning Mode if you want to
start APS, by pressing the or buttons,
come to the Start item and by pressing or
button start the APS.
When you start APS the below menu will appear on
the screen.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C28W440N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28W440N in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info