54237
10
Zoom out
Zoom in
Previous page
1/22
Next page
GB - 9 -
Before Switching on your TV
Power connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Aerial Connections
Connect the aerial plug to the aerial input socket lo-
cated at the back of the TV.
How to connect other devices
IMPORTANT: Switch off the TV before connecting any
external device.
Sockets for external connections are on the back of the
TV.
For connection of other devices via SCART connector
(or RCA Jack) refer to the manuals of the related de-
vices.
Inserting batteries in the remote control
handset
Remove the battery cover located on the back of the
handset by gently sliding it in the direction shown be-
low.
Insert two MN2400 AAA or equivalent type batteries
inside.
Replace the battery cover.
Note: Remove the batteries from the remote control
handset when it is not going to be used for a long time.
Otherwise it could be damaged if the batteries leak.
Switching the TV ON/OFF
You can operate your TV either using the remote
control handset or directly using the buttons on
the TV.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the
RED LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a pro-
gramme number is selected,
or,
Press Programme Up and Down buttons on the front of
the TV or on the remote control respectively, so the TV
will switch on and the RED Led will turn GREEN.
To switch the TV off
Press the stand-by button on the remote control, so
the TV will switch to stand-by mode and the GREEN
LED will become RED, or,
Press the power button located on the front of the
TV.
Operating the TV
You can operate your TV in two ways. First by using
the remote control handset and second by using
the controls on the TV.
APS (Automatic Programming System)
The Auto programming system automatically
programmes your TV according to the correct transmis-
sion system in your area.
When you turn on your TV for the first time, the "Auto
Setup'' menu will be displayed. In this menu if the lan-
guage setting is incorrect, use either
or but-
tons to highlight "Language'' and select the most suit-
able language using the
or buttons. Then use
either of the
or buttons to highlight "Country".
If the country setting is incorrect, use either of the
or
buttons to select the correct one. Finally use
or buttons to highlight " Start" and press ei-
ther of the
or buttons to start the "Auto-Pro-
gramming''. The "Auto-Programming system'' (APS)
can be cancelled by pressing the "TV'' button located on
the remote control handset.
When the APS has finished a table of stored stations will
be displayed on the screen with number 1 highlighted in
red. In the table you will see programme numbers and
names assigned to the stations, they will be listed in a
predetermined order.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C28W440N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28W440N in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info