54233
10
Zoom out
Zoom in
Previous page
1/32
Next page
Manual T
Manual T
uning cont.
uning cont.
When AV sockets are commonly used, for example, if you view camcorder recorded events
frequently, then we suggest assigning a dedicated program number on your TV. This can
be any program number that has not already been assigned. Follow the step by step guide
below.
Assigning A
Assigning A
V Prog. N”s
V Prog. N”s
Broadcasting stations transmit the signal to your TV on a particular defined frequency i.e.
525.25MHz. These frequencies can be entered manually if known, and you can obtain this
information by calling your local operator. In addition to frequency transmission a corresponding CHANNEL N” is also used e.g. CH34, and this
too can be directly input to your TV if known. (The S-- number has no function on this TV).
10
10
AV2 assigned to Program 6
Press and HOLD the MENU button until
Main Menu with INSTALL is shown. Use up/down
buttons to highlight INSTALL - select by
pressing the left/right buttons.
Use the left/right/up/down buttons to highlight the
frequency of the program number you wish to
enter.
Press the CH button on your handset
once - the column changes RED to
indicate selection.
1
3
4
Repeatedly press CH key to select CH- - or
---.--, and enter the known number using
0-9 keys.
Once the number has been entered, press the MENU
key once more and the display turns BLUE.
This is now stored. Press MENU to exit.
5
6
Repeat above to enter other AV sockets or
repeatedly press MENU button to store and
exit to TV mode.
6
Use up/down buttons to highlight
MANUAL TUNE, select by using the
left/right buttons.
2
Use up/down buttons to highlight
MANUAL TUNE, select by using the
left/right buttons.
2
Use the left/right/up/down buttons to
highlight the AV column of the program number you
wish to use.
3
Once highlighted press the CH
button to allow changes to be entered.
4
Select between each AV mode using the
left/right buttons
5
Press and HOLD the MENU button until
Main Menu with INSTALL is shown. Use up/down
buttons to highlight INSTALL - select by
pressing the left/right buttons.
1
Entering Known Frequencies
Entering Known Frequencies
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C28W433N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28W433N in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info