54233

Hitachi C28W433N Manual

7
Zoom out
Zoom in
Previous page
1/32
Next page
If language setting is incorrect, use up/down
buttons to highlight LANGUAGE, and select
using the left/right buttons.
Automatic T
Automatic T
uning Procedure
uning Procedure
7
7
Completed Autotune example.
SIGNAL QUALITY - If poor or noisy signals are experienced from your TV during normal operation, fit the supplied
Relay RF cable between your VCR and TV. This measure will improve the picture quality on your TV.
To automatically tune this TV to your local broadcasting stations follow the step by step guide below. Once the TV has found
all your local stations, then they are automatically assigned into the following order:
1.BBC1; 2: BBC2; 3: ITV; 4:CH4/S4C; 5: CH5 (subject to availability); 6: Satellite.
Alternatively, if you are familiar with local broadcasting frequency or CH numbers, then these can be entered manually. Please
refer to the Manual Tuning Procedure section of this booklet.
IMPORTANTNOTE: If you have a VCR or a Satellite receiver connected to this TV please ensure that they are switched on
before Autotune commences. In the case of a VCR, insert a pre-recorded tape and begin playback of your equipment. With
a Satellite receiver, select SKY NEWS. These measures ensure that all your equipment is tuned in during the AUTOTUNE
procedure. (Satellite equipment installation is explained in the Connecting of External AV Equipment section ).
Note: The VCR programme number should always be set to 0
Highlight INSTALL using the up/down buttons
(if INSTALL is not shown follow step
above once more).
Press the left/right buttons select INSTALL.
The INSTALL menu is shown.
2
3
Use the up/down buttons to highlight
AUTOTUNE.
Use the left/right buttons to begin
AUTOTUNE.
4
5
6
Press and HOLDthe MENU button until Main
Menu with INSTALL is shown
1
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C28W433N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28W433N in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info