Manual Hitachi C18DMR (page 12 of 96) (English, German, Dutch, French, Italian, Portuguese, Spanish)

506005

Zoom out

Zoom in

1/96

English

Charger

Model UC24YFA UC18YG UC18YRL

Charging voltage 7.2 – 24 V 7.2 – 18 V 7.2 – 18 V

Charging time 2.0 Ah : Ni-Cd 50 min. 50 min. 30 min.

2.6 Ah : Ni-MH 65 min. x 40 min.

3.0 Ah : Ni-MH 70 min. x 45 min.

3.3 Ah : Ni-MH 75 min. x 50 min.

3.0 Ah : Li-ion x x 45 min.

Weight 0.6 Kg 0.3 Kg 0.6 Kg

SPECIFICATIONS

Power Tool

Model C18DMR C18DL

No-load speed 3400 min

–1

Capacity Cutting depth 90° 57 mm

45° 40 mm

Rechargeable 18 V 2.0 Ah EB1820L: Ni-Cd (15 cells) x

battery 18 V 2.6 Ah EB1826HL: Ni-MH (15 cells) x

18 V 3.0 Ah EB1830HL: Ni-MH (15 cells) EBM1830: Li-ion (10 cells)

18 V 3.0 Ah EB1830X: Ni-MH (15 cells) x

18 V 3.3 Ah EB1833X: Ni-MH (15 cells) x

Light bulb 12 V, 5 W

Weight 3.6 kg 3.2 kg

Charge time is approximate. Actual charge time may vary.

“x” Indicates that the battery pack is not compatible with that specific charger.

30. WARNING: It is important to support the work

piece properly and to hold the saw firmly to

prevent loss of control which could cause personal

injury. Fig. 4 illustrates typical hand support of the

saw.

31. Place the wider portion of the saw base on that

part of the work piece which is solidly supported,

not on the section that will fall off when the cut

is made. As examples, Fig. 5 illustrates the RIGHT

way to cut off the end of board, and Fig. 6 the

WRONG way. If the work piece is short or small,

clamp is down.

DON’T TRY TO HOLD SHORT PLACES BY HAND!

32. Never attempt to saw with the circular saw held

upside down in a vise. This is extremely dangerous

and can lead to serious accidents (Fig. 7).

33. When the brake becomes ineffective, replace the

carbon brushes with new ones.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips

with the protection function to stop the output.

In the cases of 1 and 2 described below, when using

this product, even if you are pulling the switch, the

motor may stop. This is not the trouble but the result

of protection function.

1. When the battery power remaining runs out (The

battery voltage drops to about 12V (C18DL)), the

motor stops.

In such case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In

this case, release the switch of tool and eliminate

causes of overloading. After that, you can use it

again.

01Eng_C18DMR_DL_WE 11/21/08, 11:1511

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C18DMR in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi C18DMR Manual

Product: