Manual Hitachi C12YB (page 7 of 43) (English, German, French, Italian, Portuguese, Spanish)

506004

Zoom out

Zoom in

1/43

• The user must consign the unwanted appliance to

an authorized differentiated waste disposal centre for

electrical and electronic goods, or alternatively, hand it

over to the relative dealer on purchasing a new appliance

of the same type on the basis of a one to one ratio.

• Differentiated disposal, to enable possible recycling or

environmentally compatible elimination of the appliance,

helps to limit undesirable effects on health and the

environment and promotes the reuse and/or recycling of

the materials which went into making up the appliance.

WARNING: Sanctions, in accordance with the

relative legislation in force in the country of use,

will be imposed on the user if the appliance is

disposed of illegally.

6.2 ASSISTENCE

When in need of skilled personal for special maintenance,

or for repairs, both during and following the guarantee

period, always apply to authorized centres for assistance or

directly to the manufacture if there is no authorized centre

in your area.

6.3 DISPOSAL OF THE MACHINE AND PACKAGING

INFORMATION FOR USERS

In accordance with art. 13 of Legislative Decree

25th July 2005, no. 151 “Implementation

of Directives 2002/95/EEC, 2002/96/EEC

and 2003/108/EEC, relative to reducing the

use of hazardous substances in electrical and electronic

appliances and the disposal of waste”, please take note of

the following:

• The crossed out wheelie bin symbol found on the

appliance or on the packaging, indicates that the product

must be disposed of separately from ordinary household

waste when it reaches the end of its working life.

The motor does not run

The motor starts slowly

and does not reach

running speed

Excessive motor noise

The motor does not reach

full power

The motor tends to

overheat

Decrease in cutting

capacity

The cutting finish is

irregular or uneven

Flaking of the workpiece

Faulty motor, power supply cable

or plug.

Burned out fuses

Low power supply voltage.

Damaged windings.

Faulty motor

Overloaded circuit due to lighting,

utilities or other motors

Overloaded motor.

Insufﬁ cient motor cooling

The blade has been repeatedly

sharpened and its diameter has

decreased

The blade is worn out or the teeth

are not suited to the thickness of the

material being cut

The blade’s teeth are not suited to

the workpiece

Have the machine checked by skilled personnel.

Do not try to repair the machine yourselves as it

may be danger ous.

Check the fuses and replace them if necessary.

Ask for the Electricity Board to check the voltage

available.

Have the machine motor checked by skilled

personnel.

Have the motor checked by skilled personnel

Do not use other utilities or motors on the circuit to

which the cut ting-off machine is connected

Avoid overloading the motor during cutting. Remove

dust from the motor in order to allow adequate

cooling.

Adjust the limit switch for the lowering of the head

Have the blade sharpened by skilled personnel.

Check that the blade being used is appropriate by

refering to the paragraph ‘SELECTION OF THE

BLADE’.

Check the appropriate teeth to use by refering to the

paragraph ‘SELECTION OF THE BLADE’

PROBLEMS CAUSES SOLUTIONS SUGGESTED

7 TROUBLESHOOTING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C12YB in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi C12YB Manual

Product: