Manual Hitachi C12FCH (page 15 of 100) (English, German, Dutch, French, Italian, Portuguese, Spanish)

505943

Zoom out

Zoom in

1/100

English

Gloves for handling saw blades (saw blades shall

be carried in a holder wherever practicable) and

rough material.

15. The operator is adequately trained in the use,

adjustment and operation of the machine.

16. Refrain from removing any cut-offs or other parts

of the workpiece from the cutting area whilst the

machine is running and the saw head is not in the

rest position.

17. Never use the compound miter saw with its lower

guard locked in the open position.

18. Ensure that the lower guard moves smoothly.

19. Do not use the saw without guards in position, in

good working order and properly maintained.

20. Use correctly sharpened saw blades. Observe the

maximum speed marked on the saw blade.

21. Do not use saw blades which are damaged or

deformed.

22. Do not use saw blades manufactured from high

speed steel.

23. Use only saw blades recommended by HITACHI.

Use of saw blade comply with EN847-1.

24. The saw blades should be from 290 mm to 305 mm

external diameter ranges.

25. Select the correct saw blade for the material to be

cut.

26. Never operate the compound miter saw with the

saw blade turned upward or to the side.

27. Ensure that the workpiece is free of foreign matter

such as nails.

28. Replace the table insert when worn.

29. Do not use the saw to cut other than aluminium,

wood or similar materials.

30. Do not use the saw to cut other materials than those

recommended by the manufacturer.

31. Blade replacement procedure, including the method

for repositioning and a warning that this must be

carried out correctly.

32. Connect the compound miter saw to a dust

collecting device when sawing wood.

33. Take care when slotting.

34. When transporting or carrying the tool, do not grasp

the holder. Grasp the handle instead of the holder.

35. Start cutting only after motor revolution reaches

maximum speed.

36. Promptly cut OFF the switch when abnormality

observed.

37. Shut off power and wait for saw blade to stop before

servicing or adjusting tool.

38. During a miter or bevel cut the blade should not be

lifted until it has stopped rotation completely.

39. Take all the possibility of residual risks in cutting

operation into your consideration, such as the laser

radiation to your eyes, the inadvertent access to

moving parts on slide mechanical parts on machine

and so on.

SPECIFICATIONS

* Be sure to check the nameplate on product as it is subject to change by areas.

61.5 mm × 200 mm

0° or

96 mm × 155 mm

Miter 45° 61.5 mm × 140 mm

Bevel Left 45° 40 mm × 200 mm

Compound (Bevel Left 45°, Miter 45°)

40 mm × 140 mm

Saw Blade Dimensions (oD × iD × Thickness) 305 mm × 30 mm × 2.3 mm

Miter Cutting Angle Right and Left 0° – 52°

Bevel Cutting Angle Left –3° – 48°

Compound Cutting Angle

Miter (Right and Left) 0° – 45°

Bevel (Left) 0° – 45°

Voltage (by areas)* (110 V, 230 V)

Power Input* 1520 W

No-Load Speed 4000 min

–1

Machine Dimensions (Width × Depth × Height) 625 mm × 775 mm × 610 mm

Model C12LCH C12LC C12FCH

Weight (Net) 19.5 kg 19 kg

Digital Display Precision ±0.5° Yes Yes No

Laser Marker Yes No Yes

Maximum output Po<3 mW Class Laser Product

(Lambda) 654 nm

Laser medium Laser Diode

Max. Cutting

Capacity

Height × Width

01Eng_C12LCH_WE 3/11/09, 18:4914

how to remove the laser module on c12fch on Hitachi miter saw Submitted on 28-6-2022 at 22:15
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C12FCH in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi C12FCH Manual

Product: