505935

Hitachi C 10FCB Manual

7
Zoom out
Zoom in
Previous page
1/42
Next page
6
English
4. Always keep the saw blade sharp. Observe the
maximum speed marked on the saw blade.
5. Do not use saw blades which are damaged or
deformed.
6. Do not use saw blades made of high speed steel.
7. Use only saw blades recommended by HITACHI.
8. The saw blades should be from 235 mm to 260 mm
external diameter ranges.
9. Select saw blades in relation to the material to be
cut.
10. Never operate the compound saw with the saw
blade turned upward or to the side.
11. Ensure that the workpiece is free of foreign matter
such as nails.
12. Replace table insert when worn.
13. Do not use the saw to cut other than aluminium,
wood or similar materials.
14. Connect compound saw to a dust collecting device
when sawing.
The operator is informed of factors that influence
exposure of dust e.g. type of material being
machinered and importance of local extraction
(capture or source) and proper adjustment of hoods/
baffles/chutes.
15. Take care when slotting.
16. When transporting or carrying the tool, do not grasp
the holder and the guard. Grasp the handle instead
of the holder and the guard.
17. Start cutting only after motor revolution reaches
maximum speed.
18. Promptly cut OFF the switch when abnormality ob-
served.
19. Shut off power and wait for saw balde to stop before
servicing or adjusting tool.
20. During a miter or bevel cut the blade should not be
lifted until it has stopped rotation completely.
0° 59 mm × 144 mm (89 mm × 101 mm)
Miter 45° 59 mm × 102 mm (89 mm × 70 mm)
Bevel 45° 41 mm × 144 mm
Miter + Bevel 45° 41 mm × 102 mm (44 mm × 89 mm)
Saw Blade Dimensions (oD × iD × Thickness) 255 mm × 30 mm × 2.7 mm
Miter Cutting Angle Right 0° – 60°, Left 0° – 45°
Bevel Cutting Angle Left 0° – 45°
Power Input 1640W*
No-Load Speed 4900 min
-1
Machine Dimensions (Width × Depth × Height) 547 mm × 592 mm × 581 mm
Weight (Net) 14 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
Max. Cutting
Capacity
Height x Width
STANDARD ACCESSORIES
(1) 255 mm TCT Saw blade ............................................. 1
(2) Dust bag ...................................................................... 1
(3) 10 mm Box wrench .................................................... 1
(4) Vise Assembly ............................................................ 1
(5) Collar (A) (mount on tool) .......................................... 1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (SOLD SEPARATELY)
(1) Extension Holder and Stopper
(2) Saw blade 255 mm TCT Saw blade for fine surface
(Total teeth:60)
(3) Saw blade 255 mm TCT Saw blade for normal cut
(Total teeth:70)
Optional accessories are subject to change without notice.
APPLICATION
⅜ Cutting various types of alminium sach and wood.
UNPACKING
⅜ Carefully unpack the power tool and all related items
(standard accessories).
⅜ Check carefully to make certain all related items
(standard accessories) are present.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position. If
the plug is conencted to a receptacle while the trigger
switch is in the ON position, the power tool will start
operating immediately, inviting serious accident.
3. Extention cord
When the work area is removed from the power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be kept
as short as practicable.
4. When the power tool is prepared for shipping, its
main parts are secured by a locking pin.
Move the handle slightly so that the locking pin can
be disengaged.
During transport, lock the locking pin into the gear
case. (Fig. 2)
5. Attach the dust bag to the main unit (Fig. 1)
6. Attach the side handle to the turntable (Fig. 1)
7. Installation
Attach the power tool to a level, horizontal work bench.
Select 8 mm diameter bolts suitable in length for the
thickness of the work bench.
SPECIFICATIONS
C10FCB/1-E,65E 6/21/02, 5:35 PM6
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C 10FCB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C 10FCB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info