160236
10
Zoom out
Zoom in
Previous page
1/18
Next page
DAB RESET
When you move the radio to another part of the country, your pre-tuned and stored DAB stations may no
longer be available. If this is the case then you will need to reset your radio back to its original factory
settings; to perform a DAB reset, please do the following:
1.
Press the DAB/FM button to select DAB mode.
2. Press the MENU button once to enter into the “Setup menu”, then rotate the JOG MODE/SELECT
control for selection.
3. When the display shows the “DAB Reset”, press the JOG MODE/SELECT control once, the display will
show “Press
SELECT to confirm reset …”.(F10)(F11)
4. Press the JOG MODE/SELECT control again to confirm, the display will show “Scanning …” and it will
perform DAB full scan function.
5. After the scan has finished, the radio will select and display the first alphanumerically found station.
Note: All
of your stored DAB presets will be lost once the reset has taken place.
Storing and recalling stored preset stations
In either DAB or FM mode, you can store up to 20 stations to the favourite presets; this will enable you to
get direct access to your favourite stations.
1. To store a preset, first tune to your desired station, then press the PROGRAM button once, the display
will
show “PRESET#” and flash.(F8)
2. Press the PS + or PS - button to select your desired station preset number, then press the PROGRAM
button to confirm your selection; the display will show “Preset # saved” in DA B mode.(F9)
3. To recall a preset station, press the
PS + or PS - button to select the stations that you have stored; the
display will show “Preset # loaded” in DAB mode.
4. If you press a preset that hasn’t been allocated a station; In DAB mode, the display will show “Preset
# free”.
Note: The stored
stations will be saved into its memory and power off will not erase it. Storing a
new station into a preset location will erase the previously stored station in that location.
UK-9
F9
F8
F10
F11
1. To select FM, press the DAB /FM button, the display will show FM and the frequency.
2. To activate frequency auto search, press and hold the or button until it starts to scan down or up
the frequency band; it will stop automatically
once a station has been found.
3. To activate manual search, press the JOG MODE/SELECT control once, when Tuning →” appears
in the display, rotate the JOG MODE/SELECT control until you read the correct frequency or the
reception is at its best.
4. You can also
press the or button on the remote control to select your desired frequency.
5. Press the MENU button to toggle select between the FM “STEREO” and “MONO” reception.
FM mode
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi axm898e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi axm898e in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info