Manual Hitachi 49HK6003 (page 14 of 87) (English, German, Dutch, Spanish)

683791

Zoom out

Zoom in

1/87

English - 25 -

Highlight Extras tab and press OK to access below

options.

Highlight Genre: Displays Highlight Genre menu.

Select a genre and press OK. The events in the

programme guide matching the selected genre will

be highlighted.

Guide Search: Displays searching options. Using

these options, you can search the programme guide

database in accordance with the selected criteria.

Matching results will be listed.

Now: Displays current event of the highlighted

channel.

Zoom: Highlight and press OK to see events in a

wider time interval.

Now/Next Schedule

In this layout option, only the current and next events

of the listed channels will be displayed. You can use

the directional buttons to scroll through the list of the

events.

Press Back/Return button to use available tab options.

Highlight Filter tab and press OKWRVHHWKH¿OWHULQJ

options. To change the layout highlight Timeline

Schedule and press OK.

Event Options

Use the directional buttons to highlight an event

and press OK button to display Options menu. The

following options are available.

Select Channel: Using this option, you can switch

to the selected channel in order to watch it. The

programme guide will be closed.

More Info: Display detailed information on the selected

event. Use up and down directional buttons to scroll

through the text.

Set Timer on Event / Delete Timer on Event: Select

Set Timer on Event option and press OK. You can set

timers for future events. To cancel an already set timer,

highlight that event and press the OK button. Then

select Delete Timer on Event option. The timer will

be cancelled.

Record / Delete Rec. Timer:

Select the Record

option and press the OK button. If the event is going

to be broadcasted at a future time, it will be added

to Timers list to be recorded. If the selected event is

being broadcasted at the moment, recording will start

immediately.

To cancel an already set record timer, highlight that

event and press the OK button and select the option

Delete Rec. Timer. The record timer will be cancelled.

IMPORTANT: Connect a USB disk to your TV while the TV

is switched off. You should then switch on the TV to enable

the recording feature.

Notes: You cannot switch to any other channel while there is

an active recording or timer on the current channel.

It is not possible to set timer or record timer for two or more

individual events at the same time interval.

Teletext Services

Press the Text button to enter. Press again to activate

mix mode, which allows you to see the teletext page

and the TV broadcast at the same time. Press once

more to exit. If available, sections in the teletext pages

will become colour-coded and can be selected by

pressing the coloured buttons. Follow the instructions

displayed on the screen.

Digital Teletext

Press the Text button to view digital teletext information.

Operate it with the coloured buttons, cursor buttons

and the OK button. The operation method may differ

depending on the contents of the digital teletext. Follow

the instructions displayed on the digital teletext screen.

When the Text button is pressed again, the TV returns

to television broadcast.

Software Upgrade

<RXU79LVFDSDEOHRI¿QGLQJDQGXSGDWLQJWKH¿UPZDUH

automatically via the broadcast signal or via Internet.

Software upgrade search via user interface

On the main menu select Settings>System and then

More. Navigate to Software upgrade and press the

OK button. Then select Scan for upgrade and press

OK button to check for a new software upgrade.

If a new upgrade is found, it starts to download the

upgrade. After the download is completed, a warning

will be displayed, press OK button to complete software

upgrade process and restart TV.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock

if Automatic scanning option is set to Enabled and if

the TV is connected to an aerial signal or to Internet. If

a new software is found and downloaded successfully,

it will be installed at the next power on.

Note: Do not unplug the power cord while led is blinking during

the reboot process. If the TV fails to come on after the upgrade,

unplug, wait for two minutes then plug it back in.

All updates are automatically controlled. If a manual search

is carried out and no software is found then this is the current

version.

Troubleshooting & Tips

TV will not turn on

Make sure the power cord is plugged in securely to a

wall outlet. Press the Power button on the TV.

Poor picture

 Check if you have correctly tuned the TV.

 Low signal level can cause picture distortion. Please

check antenna connections.

 Check if you have entered the correct channel

frequency if you have performed manual tuning.

English - 26 -

No picture

 TV is not receiving any signal. Make sure the correct

source has been selected.

 Is the antenna connected properly?

 Is the antenna cable damaged?

 Are suitable plugs used to connect the antenna?

 If you are in doubt, consult your dealer.

No sound

 Check if the TV sound is muted. Press the Mute

button or increase the volume to check.

 Sound may be coming from only one speaker. Check

the balance settings from Sound menu.

Remote control - no operation

 The batteries may be exhausted. Replace the

batteries.

 The batteries maybe inserted incorrectly. Refer to

the section “Inserting the Batteries into the Remote”.

No signal on an input source

 It is possible that no device is connected.

 Check the AV cables and connections from your

device.

 Check the device is switched on.

Recording unavailable

7RUHFRUG DSURJUDPPH \RX VKRXOG¿UVW FRUUHFWO\

connect a USB storage device to your TV, while the

TV is switched off. You should then switch on the TV to

enable recording feature. If you cannot record, check

the storage device is correctly formatted and there is

VXI¿FLHQWVSDFH

USB is too slow

If a “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB storage

device does not meet the speed requirements. Try

using a different USB storage device.

PC Input Typical Display Modes

The following table is an illustration of some of the

typical video display modes. Your TV may not support

all resolutions.

Index Resolution Frequency

640x350 85Hz

2 640x480 60Hz

3 640x480 72Hz

4 640x480 75Hz

5 800x600 56Hz

6 800x600 60Hz

7 800x600 72Hz

8 800x600 75Hz

9 1024x768 60Hz

10 1024x768 70Hz

11 1024x768 75Hz

12 1024x768 85Hz

13 1152x864 75Hz

14 1280x768 60Hz

15 1280x768 75Hz

16 1280x960 60Hz

17 1280x960 75Hz

18 1280x1024 60Hz

19 1280x1024 75Hz

20 1360x768 60Hz

21 1366x768 60Hz

22 1400x1050 59Hz

23 1400x1050 60Hz

24 1400x1050 75Hz

25 1440x900 60Hz

26 1440x900 75Hz

27 1600x1200 60Hz

28 1680x1050 59Hz

29 1680x1050 60Hz

30 1920x1080 60Hz

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi 49HK6003 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 4,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi 49HK6003 Manual

Product: