Manual Hitachi 43HK6003 (page 9 of 389) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Norwegian)

683776

Zoom out

Zoom in

1/389

English - 15 -

clear the checkbox by pressing OK after moving the

focus on the desired broadcast type option.

Digital Aerial: If D. Aerial broadcast search option

is turned on, the TV will search for digital terrestrial

broadcasts after other initial settings are completed.

Digital Cable: If D. Cable broadcast search option

is turned on, the TV will search for digital cable

broadcasts after other initial settings are completed.

A message will be displayed before starting to search

asking if you want to perform cable network search. If

you select Yes and press OK you can select Network

or set values such as Frequency, Network ID and

Search Step on the next screen. If you select No

and press OK you can set Start Frequency, Stop

Frequency and Search Step on the next screen.

:KHQ¿QLVKHG KLJKOLJKW Next and press OK button

to continue.

Note: Searching duration will change depending on the

selected Search Step.

Satellite: If Satellite broadcast search option is turned

on, the TV will search for digital satellite broadcasts

after other initial settings are completed. Before

satellite search is performed some settings should

be made. A menu will be displayed where you can

select to start M7 or Fransat operator installation or

a standard installation.

To start an M7 operator installation set the Install Type

as Operator and the Satellite Operator as the related

M7 operator. Then highlight Preferred Scan option

and set as Automatic channel scan and press OK

to start the automatic search. These options can be

preselected depending on the Language and Country

VHOHFWLRQVWKDW\RXPDGHLQWKHHDUOLHUVWHSVRIWKH¿UVW

time installation process. You may be asked to select

HD/SDRUFRXQWU\VSHFL¿FFKDQQHOOLVWDFFRUGLQJWR

your M7 operator type. Select one and press OK to

proceed.

:DLWWLOO WKH VFDQ LV ¿QLVKHG 1RZ WKH OLVW KDV EHHQ

installed.

While performing an M7 operator installation, if you

want to use the satellite installation parameters that

differ from the default settings select the Preferred

Scan option as Manual channel scan and press the

OK button to proceed. Antenna Type menu will be

displayed next. After selecting the antenna type and

the desired satellite in the following steps press OK

in order to change the satellite installation parameters

in the sub-menu.

To start a Fransat installation set the Install Type as

Operator and than set the Satellite Operator as the

related Fransat operator. Then press the OK button

to start Fransat installation. You can select to start an

automatic or manual installation.

Press OK to proceed. Fransat Installation will be

performed and broadcasts will be stored (if available).

If you set the Install Type as Standard, you can

continue with regular satellite installation and watch

satellite channels.

You can start a Fransat installation at any time later

from the Settings>Installation>Automatic channel

scan> Satellite menu.

In order to search for satellite channels other than

M7 or Fransat channels you should start a standard

installation. Select the Install Type as Standard and

press the OK button to proceed.

Antenna Type menu

will be displayed next.

There are three options for antenna selection. You can

select Antenna Type as Direct, Single Satellite Cable

or DiSEqC switch by using Left or Right buttons.

After selecting your antenna type press OK to see

the options to proceed. Continue, Transponder list

and &RQ¿JXUH/1% options will be available. You can

change the transponder and LNB settings using the

related menu options.

 Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK to

continue. Select an available satellite on the next

screen and press OK to scan for services.

 Single Satellite Cable: If you have multiple

receivers and a single satellite cable system, select

this antenna type. Press OKWRFRQWLQXH&RQ¿JXUH

settings by following instructions on the next screen.

Press OK to scan for services.

 DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type.

Press OK to continue. You can set four DiSEqC

options (if available) on the next screen. Press OK

EXWWRQWRVFDQWKH¿UVWVDWHOOLWHLQWKHOLVW

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

A dialogue screen asking to activate parental control

will be displayed. If you select Yes, parental restriction

RSWLRQVZLOOEH GLVSOD\HG &RQ¿JXUH DVGHVLUHGDQG

press OK ZKHQ ¿QLVKHG 6HOHFW No and press OK

to advance, if you don’t want to activate parental

restrictions.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

While the search continues current scan results will

be displayed at the bottom of the screen. After all the

available stations are stored, Channels menu will be

displayed. You can edit the channel list according to

your preferences using the Edit tab options or press

the Menu button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press

OK WRFRQ¿UP.

English - 16 -

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

FKDQQHOQXPEHUVHTXHQFHLIDYDLODEOH

Notes:

To search for M7 channels after the First Time Installation,

\RXVKRXOGSHUIRUPWKH¿UVWWLPHLQVWDOODWLRQDJDLQ2USUHVVWKH

Menu button and enter the Settings>Installation>Automatic

channel scan>Satellite menu. Then follow the same steps

mentioned abow in the satellite section.

'RQRWWXUQRIIWKH79ZKLOHLQLWLDOL]LQJ¿UVWWLPHLQVWDOODWLRQ

Note that, some options may not be available depending on

the country selection.

Using Satellite Channel Table Feature

You can perform these operations using the Set-

tings>Installation>Satellite Settings>Satellite

Channel Table menu. There are two options regarding

to this feature.

You can download or upload satellite channel table

data. In order to perform these functions a USB device

must be connected to the TV.

You can upload current services and related satellites

& transponders in TV, to a USB device.

Additionally you can download one of the satellite

FKDQQHOWDEOH¿OHVVWRUHGLQ86%GHYLFHWRWKH79

:KHQ\RXVHOHFWRQHRIWKHVH¿OHVDOOVHUYLFHVDQG

related satellites and transponders in the selected

¿OHZLOOEHVWRUHGLQWKH79,IWKHUHDUHDQ\LQVWDOOHG

terrestrial, cable and/or analogue services, they will

be kept and only satellite services will be removed.

Afterwards, check your antenna settings and make

changes if necessary. An error message stating “No

Signal” may be displayed if the antenna settings are

QRWFRQ¿JXUHGSURSHUO\

Media Playback via USB Input

<RXFDQFRQQHFW´DQG´LQFK+''ZLWKH[WHUQDOSRZHU

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT!%DFNXSWKH¿OHVRQ\RXUVWRUDJHGHYLFHV

before connecting them to the TV. Manufacturer will

QRWEHUHVSRQVLEOHIRUDQ\¿OHGDPDJHRUGDWDORVV

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting but recording will not be available

with NTFS formatted disks.

While formatting USB hard drives which have

more than 1TB (Tera Byte) storage space you may

experience some problems in the formatting process.

Wait a little while before each plugging and unplugging

DVWKHSOD\HUPD\VWLOOEHUHDGLQJ¿OHV)DLOXUHWRGR

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

ZKLOHSOD\LQJD¿OH

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note::KHQYLHZLQJLPDJH ¿OHVWKHMedia Browser menu

FDQRQO\ GLVSOD\ LPDJH¿OHV VWRUHGRQ WKHFRQQHFWHG

USB device.

USB Recording

Recording a Programme

IMPORTANT: When using a new USB hard disk

GULYHLW LV UHFRPPHQGHG WKDW \RX¿UVW IRUPDW WKH

disk using your TV’s Format Disk option in the

TV>Recordings>Settings menu.

7RUHFRUGDSURJUDPPH\RXVKRXOG¿UVWFRQQHFWD86%

disk to your TV while the TV is switched off. You should

then switch on the TV to enable the recording feature.

To use recording your USB drive should have 2 GB free

space and be USB 2.0 compatible. If the USB drive

is not compatible an error message will be displayed.

To record long duration programmes such as movies, it

is recommended to use USB Hard disk drives (HDD’s).

Recorded programmes are saved into the connected

USB disk. If desired, you can store/copy recordings

RQWRD FRPSXWHU KRZHYHUWKHVH¿OHVZLOO QRW EH

available to be played on a computer. You can play

the recordings only via your TV.

Lip Sync delay may occur during the timeshifting. Radio

record is supported. The TV can record programmes

up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not

VXI¿FLHQWWKHUHFRUGLQJPD\IDLODQGWKHWLPHVKLIWLQJ

feature may not be available.

It is recommended to use USB hard disk drives for

recording HD programmes.

Do not pull out the USB/HDD during a recording. This

may harm the connected USB/HDD.

If the AC cord is unplugged while there is an active

USB-recording timer setting, it will be cancelled.

Multipartition support is available. A maximum of two

GLIIHUHQWSDUWLWLRQVDUHVXSSRUWHG7KH ¿UVW SDUWLWLRQ

of the USB disk is used for USB Recording ready

features. It also must be formatted as the primary

partition to be used for the USB Recording ready

features.

Some stream packets may not be recorded because

of signal problems, as a result sometimes videos may

freeze during playback.

Record, Play, Pause, Display (for playlist dialogue) keys

can not be used when teletext is on. If a recording starts

from timer when teletext is on, teletext is automatically

turned off. Also teletext usage is disabled when there

is an ongoing recording or playback.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi 43HK6003 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 20,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi 43HK6003 Manual

Product: