Manual Hitachi 43HBT62 (page 14 of 27) (English)

646610

Zoom out

Zoom in

1/27

English - 10 -

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

Additionally you can set a broadcast type as your

favourite one. Priority will be given to the selected

broadcast type during the search process and the

channels of it will be listed on the top of the Channel

List. When nished, press OK to continue.

You can activate Store Mode option at this point.

This option will congure your TV’s settings for store

environment and depending on the TV model being

used, the supported features of it may be displayed

on the top of the screen as an info banner. This option

is intended only for store use. It is recommended to

select Home Mode for home use. This option will be

available in System>Options>More menu and can

be turned off/on later.

Press OK button on the remote control to continue

and the Network Settings menu will be displayed.

Please refer to Connectivity section to congure a

wired or a wireless connection. After the settings are

completed press OK button to continue. To skip to

the next step without doing anything press the Rapid

advance button on the remote.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

After all the available stations are stored, scan results

will be displayed. Press OK to continue. The Edit

Channel List menu will be displayed next. You can

edit the channel list according to your preferences or

press the Menu button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel number sequence (if available).

Note: Do not turn off the TV while initializing rst

time installation. Note that, some options may not be

available depending on the country selection.

Using SatcoDX Feature (depending on the model)

You can perform SatcoDX operations using the

Installation>Satelite Settings menu. In the SatcoDX

menu, there are two options regarding to the SatcoDx.

You can download or upload SatcoDX data. In order

to perform these functions a USB device must be

connected to the TV.

You can upload current services and related satellites

& transponders in TV, to a USB device.

Additionally you can download one of the SatcoDx

les stored in USB device, to the TV.

When you select one of these les, all services and

related satellites and transponders in the selected

le will be stored in the TV. If there are any installed

terrestrial, cable and/or analog services, they will be

kept and only satellite services will be removed.

Afterwards, check your antenna settings and make

changes if necessary. An error message stating “No

Signal” may be displayed if the antenna settings are

not congured properly.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with external

power supply) external hard disk drives or USB

memory stick to your TV by using the USB inputs

of the TV.

IMPORTANT! Back up the les on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be

available with NTFS formatted disks.

While formatting USB hard drives which have

more than 1TB (Tera Byte) storage space you may

experience some problems in the formatting process.

Wait a little while before each plugging and unplugging

as the player may still be reading les. Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a le.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image les the Media Browser

menu can only display 1000 image les stored on the

connected USB device.

Timeshift Recording

Press Pause button while watching a broadcast to

activate timeshifting mode. In timeshifting mode, the

programme is paused and simultaneously recorded

to the connected USB disk.

Press Play button again to resume the paused

programme from where you stopped. Press the Stop

button to stop timeshift recording and return to the

live broadcast.

Timeshift cannot be used while in radio mode.

You cannot use the timeshift fast reverse feature

before advancing the playback with the fast forward

option.

Instant Recording

Press Record button to start recording an event

instantly while watching a programme. You can

press Record button on the remote control again to

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi 43HBT62 in the language / languages: English as an attachment in your email.

The manual is 11,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi 43HBT62

Hitachi 43HBT62 User Manual - German - 30 pages

Hitachi 43HBT62 User Manual - Dutch - 28 pages

Hitachi 43HBT62 User Manual - French - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi 43HBT62 Manual

Product: