635125
35
Zoom out
Zoom in
Previous page
1/41
Next page
35
TROUBLESHOOTING
Symptoms That Seemingly Appear to be Failures
Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer.
WARNING
Self servicing can be hazardous.
Symptom Point to check See Page
There is no picture and the power-indicating lamp is
off.
Check to see that the power cable is properly connected.
Press the main switch.
13
14
In RGB mode, the message “No cable connected”
and “Going to sleep” is displayed.
In Video mode, the message “No sync Detected” is
displayed.
There is no picture and the power indicating lamp
lights orange.
No sync signal is detected.
Check that the signal cable is properly connected.
Make sure that the computer, imaging equipment, etc., is turned
on.
Make sure the computer is not in power-save mode.
Ensure that the input selection matches the connection terminal.
12
The message “Invalid Mode.” is displayed.
An input signal is received abnormally.
Ensure that the input signal matches the monitor specifications.
Check to see that the signal cable is properly connected.
12
The power indicating lamp is lit normally but there is
no picture.
Check the contrast and brightness settings (adjust them for higher
contrast and brightness).
Check to see that the signal cable is properly connected.
18
12
The display image appears slanted.
Text displayed across the screen appears vertically
streaked, with the characters in vertical columns
blurred.
Adjust the clock frequency and the phase. (Adjust the clock
frequency first, the dot clock phase next.)
(RGB input)
22
37
Text displayed across the screen appears blurred.
A fine pattern flickers when displayed on the screen.
Adjust the clock phase till the desired clarity is obtained.
(RGB input)
22
37
The remote control does not work. Ensure that the batteries in the remote control are inserted with
the correct polarity.
Check to see that the batteries in the remote control are functional.
9
ENGLISH
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi 42PMA330A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi 42PMA330A in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info