FUNCTION (continued)
Size Switching
Each time button of the remote control is pressed, the screen display size is
switched in sequence, and the status will be displayed at the bottom of the screen.
TV/AV signal input
Watching Standard Definition Pictures (480i, 480p, 576i, 576p)
TV/AV1/AV2/AV3/AV4/HDMI1/HDMI2
Watching High Definition Pictures (720p, 1080i, 1080p (HDMI only))
AV1/AV2/HDMI1/HDMI2
You can display the image at optimum condition by selecting display size depending on the current output image as shown below.
Input Signal
Display
Screen
Display Size To display suitable screen as follows.
When Watching SD Pictures:
(4:3 Signal)
4:3
Play a 4:3 image on screen faithfully. Blanking occurs on both
sides.
Panoramic1
Play a 4:3 image which enlarges horizontal and vertical size of
the middle in equal scales, and displays both sides appearing
much wider.
Panoramic2
The vertical size of Panoramic1 is reduced so that you can
see the whole image, including any subtitles, that might
otherwise not be fully visible on the screen.
(Vista)
Zoom
Play a 16:9 image in 4:3 frame (Vista size) faithfully.
*In some case, slight blanking may remain at the top and
bottom.
(Cinema)
Cinema
Play a 21:9 image in 4:3 frame (Cinema size) expanding
vertically.
*In some case, slight blanking may remain at the top and
bottom.
(Squeeze)
Full
Play a 4:3 image faithfully in the standard vertical size and
horizontally squeezed.
When Watching HD Pictures:
(16:9 Signal)
Full 1 Play a 16:9 image faithfully showing 95% of the size.
Full 2
Play a 16:9 image faithfully showing 100% of the size.
*In some case, the screen display has unnecessary blanking
or noise at the edges.
(4:3 Image in
16:9 Frame)
Panoramic
Play a 4:3 image in 16:9 frame which enlarges horizontal and
vertical size of the middle in equal scales, and displays both
sides appearing much wider.
Information
Aspect ratio represents horizontal : vertical ratio on screen.
For example, vista image is 16:9 in 4:3 image.
ZOOM button
