64414
73
Zoom out
Zoom in
Previous page
1/79
Next page
72
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms Check list
Page
Cannot display the image from “Photo Input function”.
Check the connecting equipments and image format.
(Please refer to “Photo Input function”.)
61
,
65
,
66
The image on the screen is moving in
an oblique direction.
(RGB input mode only)
Adjust “Horizontal Clock” and “Clock Phase”.
28
The coarse horizontal stripes could be
seen in full-display mode.
(RGB input mode only)
Adjust “Horizontal Clock”.
28
The part of the image is lacking.
AAAAA
Try “Auto Adjust”. (RGB input mode only)
28
The horizontal stripes are moving
vertically with ickering screen.
(RGB input mode only)
Check the Signal status of the PC by pressing
button
on the remote control.
If the Vertical Frequency of the PC is set to less than 85Hz,
adjust its level higher (up to 85Hz).
Set “Vertical Filter” to ON.
(Please note that you will have lower vertical resolution with
this action.)
29
When the characters are displayed
on the whole screen, the vertical
stripes appear and some of the
characters are blurred.
(RGB input mode only)
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
Try “Auto Adjust”.
If the display condition is not improved with Auto Adjust,
adjust “Horizontal Clock”.
28
When the letter string is displayed in
full-screen, all of the characters on
the screen are blurred.
(RGB input mode only)
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
Try “Auto Adjust”.
If the condition is not improved with Auto Adjust, adjust
“Clock Phase” till you get clearest image.
28
When the small patterns are
displayed on the screen, the entire
screen is ickering.
(RGB input mode only)
Try “Auto Adjust”.
If the condition is not improved with Auto Adjust, adjust
“Clock Phase” till you get icker-free display.
28
The thickness of the letters, lines, etc is not displayed
evenly.
(RGB input mode only)
It could happen when the image with more than 768 lines
of vertical resolution is displayed.
Please note this is not malfunction.
75
No Picture or sound is output.
(DTT mode only)
It might occur because it is tuned to digital teletext channel.
Return to another channel.
44
Forgotten channel lock code.
(DTT mode only)
Re-install channel to cancel channel lock.
41
Forgotten menu lock code.
(DTT mode only)
Contact the customer service listed on the rear page.
-
Due to the bad reception, block noise interferes during
DTT mode.
(DTT mode only)
Check the aerial system to improve signal quality.
14
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi 37LD9700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi 37LD9700 in the language / languages: English as an attachment in your email.

The manual is 15,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi 37LD9700

Hitachi 37LD9700 User Manual - German - 79 pages

Hitachi 37LD9700 User Manual - Dutch - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info