635074
34
Zoom out
Zoom in
Previous page
1/54
Next page
32
OPERATING INSTRUCTIONS (continued)
SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB))







Selected characters  Setup hint
Auto Adjust*
Adjust
Pressing the OK button here,
Automatic regulation is started.
Horizontal Position. Vertical Position. Horizontal Clock and Clock
Phase are adjusted automatically.
Horizontal Position
Moves the horizontal position to left. Moves the horizontal position to right.
Adjust the left-side display position.
Screen display changes to Magenta color if beyond the available
range. (This function is only for RGB2. It’s not available (grayed
out) for RGB1 (DVI-PC).)
Vertical Position
Moves down the vertical position Moves up the vertical position.
Adjust the vertical display position.
Screen display changes to Magenta color if beyond the available
range. (This function is only for RGB2. It’s not available (grayed
out) for RGB1 (DVI-PC).)
Horizontal Clock
Reduces the dot clock frequency
(shrinks the right side).
Increases the dot clock frequency
(expands the right side).
Adjust for maximum character clarity.
(This function is only for RGB2. It’s not available (grayed out) for
RGB1 (DVI-PC).)
Clock Phase
Slows the dot clock phase (shifts
slightly to left).
Advances the dot clock phase (shifts
slightly to right).
Adjust for clear character visibility.
(This function is only for RGB2. It’s not available (grayed out) for
RGB1 (DVI-PC).)
Reset
(off the function) (waiting to reset)
The original factory settings for the items of this Menu page can
be restored by pressing the OK button.
Input Level
Normally set to 0.7 V. If white is found to spread across the
screen, set to 1.0 V. (This is effective only for RGB2.)
Frequency Display
Set this to Off if the frequency information of the Input Signal
Screen Display is not required.
WVGA Type
This is only available for W-VGA signal.
When it is set to On, the display area mode can be selected Full
or Real. (With RGB1 INPUT, the screen remains the same. RGB2
(ANALOG) INPUT only)
WXGA Mode
This is only available for W-XGA signal.
(RGB2 (ANALOG) INPUT only)
Off
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi 32LD7800TA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi 32LD7800TA in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info