65364
48
Zoom out
Zoom in
Previous page
1/59
Next page
47
ENGLISH
TROUBLESHOOTING (continued)
Actions to Correct Abnormal Displays
Actions to Correct Abnormal Disp lays
Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments
suggested below. (only for RGB2)
Symptom 1
Text displayed across the screen appears vertically streaked, with some characters blurred (Figure 1).
Example
Figure 1
Vertical Streaks
Before adjustment.
Some characters are blurred.
After adjustment.
All characters appear
crisp now.
After adjustment.
All characters are
blurred.
1) Press the MENU button. The Main Menu will be displayed.
2) Press the T SELECT button and select Setup.
3) Press the OK button. The Setup Menu will be displayed.
4) Press the T SELECT button and select Auto Adjust.
Adjustment
procedure
When adjustment is not possible with Auto Adjust
5) Press the MENU button. The Main Menu will be displayed.
6) Press the T SELECT button and select Setup.
7) Press the OK button. The Setup Menu will be displayed.
8) Press the T SELECT button and select Horizontal Clock.
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Horizontal Clock adjustment.)
9) Press the X or W ADJUST buttons and search for clear characters over the entire screen.
10) Perform adjustment for symptom 2 below, when the characters are blurred on the entire screen.
The display image may be momentarily disturbed during clock adjustment but this is not a failure.
Symptom 2
Text displayed across the screen appears blurred in its entirety (Figure 2).
A fine pattern flickers when displayed on the screen (Figure 3).
Example
Figure 2
Before adjustmen
t
After adjustment
Figure 3
Before adjustment
After adjustment
1) Press the MENU button. The Main Menu will be displayed.
2) Press the T SELECT button and select Setup.
3) Press the OK button. The Setup Menu will be displayed.
4) Press the T SELECT button and select Auto Adjust.
When adjustment is not possible with Auto Adjust
5) Press the MENU button. The Main Menu will be displayed.
6) Press the T SELECT button and select Setup.
7) Press the OK button. The Setup Menu will be displayed.
8) Press the TSELECT button and select Clock Phase.
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Clock Phase adjustment.)
Adjustment
procedure
9) Press the X or W ADJUST buttons to make the text
appear clean across the screen.
9) Press the X or W ADJUST buttons to make the text
appear without flickering.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi 32LD7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi 32LD7200 in the language / languages: English as an attachment in your email.

The manual is 9,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi 32LD7200

Hitachi 32LD7200 User Manual - German - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info