633720
6
Zoom out
Zoom in
Previous page
1/12
Next page
X
Remove both adjustable feet and remove the bottom
hinge bracket by unscrewing the bolts. Support the
door to avoid damage.
REVERSING THE DOOR SWING
6
Unscrew and remove the hinge pin and refit it into the
adjacent hole
. Refit the bracket fitting the hinge
pin, spacers and washers into the bushing at the
bottom of the door. Replace both adjustable feet.
Stand the Freezer, use a flat bladed screw driver to
remove the 2 screw covers at the rear of the Freezer
lid.
Unscrew and lift the lid of the Freezer from the rear
and remove it. Put it in a safe place.
Unscrew and remove the top hinge pin, turn the
bracket over and replace it. Tighten securely.
Remove the three screws and the plastic blanking
plate and replace them on the opposite side of the
cabinet.
Refit the top bracket fitting the hinge pin, spacers
and washers into the bushing at the top of the door.
Check the door is aligned correctly before tightening.
Remove the top hinge bracket by unscrewing the
three retaining nuts. DO NOT undo the nut holding
the hinge pin. Support the door to avoid damage.
Check that door is
aligned horizontally
and vertically. Re-
adjust the levelling feet. See
‘Levelling the Freezer’ on
page
2.
â Ensure the Freezer is unplugged and empty.
â We recommend you have someone to assist you.
Tools required
â Phillips style screwdriver
â Flat bladed screwdriver
â Small adjustable spanner
Before you start lay the Freezer on its back in order
to gain access to the base. You should rest it on
soft foam packaging or similar material to avoid
damaging the cooling pipes at the rear of the Freezer.
1 2
4 5
6
7
8 9
10
11
Replace the lid by fitting the front first and sliding
into place, securing it with the two screws. Replace
the screw covers.
Remove levelling foot from this point and relocate it
into available point at opposite front corner.
3
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hisense MUZ5580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hisense MUZ5580 in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info