633711
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
CLEANING
Cleaning inside the Larder Fridge
You should clean the Larder Fridge internally with a weak solution of
bicarbonate of soda. Then rinse with warm water using a ‘wrung-out’
sponge or cloth. Wipe the Larder Fridge dry before replacing t he food.
Wash the baskets and shelves in warm soapy water. Ensure they are
completely dry before replacing in the Larder Fridge. Plug in and switch
on the mains supply
.
Cleaning the outside of the Larder Fridge
Use standard furniture polish to clean the Larder Fridge exterior.
Make sure that the doors are closed, to prevent polish getting on the
magnetic door seal or inside. The grille of the condenser at the back of
the Larder Fridge and the adjacent components can be vacuumed using
a soft brush attachment.
Cleaning tip
â Defrost and clean when food stocks are low.
Moving your Larder Fridge
Location
Do not locate your Larder Fridge near a heat source, eg. cooker, boiler
or radiator. Also avoid direct sunlight.
See 'Location' on page 4.
Levelling the Larder Fridge
Make sure the Larder Fridge is level. Use the rotating levelling feet at
the front. If the Larder Fridge is not level, the doors and magnetic seal
4.
Do not turn on the Larder Fridge for 4 hours
After the Larder Fridge is in place it needs to be left for 4 hours.
Installation
Don’t cover or block the vents or grilles of your appliance.
Servicing
Repairs and maintenance of the appliance should only be performed by
Changing the internal light
1
Larder Fridge and disconnect the electrical supply.
2 Push the level at the base of the light to the rear to release the light
cover
.
3
Remove the old bulb by unscrewing it in an anti-clockwise direction
Replace with a new bulb (15W ) by screwing it in a clockwise direction
4
5 Replace the light cover back into position and click back into place.
6 Re-connect your Larder Fridge to the electrical supply and switch on.
making sure that it is secure in the bulb holder
MAINTENANCE
Before carrying out the bulb replacement always switch off the
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hisense MTL55250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hisense MTL55250 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info