Cleaning and Care
For hygienic reasons the appliance interior, including interior accessories, should be
cleaned regularly. The fridge should be cleaned and maintained at least every two
months.
Warning!
The appliance may not be connected to the mains during cleaning. Danger of electrical
shock! Before cleaning switch the appliance off and remove the plug from the mains, or
switch off or turn out the circuit breaker or fuse. Never clean the appliance with a
steam cleaner. Mois ture could accumulate in electrical components, danger of
electrical shock! Hot vapors can lead to the damage of plastic parts. The appliance must
be dry before it is placed back into service.
Important!
Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice
from orange peel, butyric acid, cleanser that contain acetic acid.
Do not allow such substances to come into contact with appliance parts.
Do not use any abrasive cleansers.
Remove the food from the refrigerator. Store it in a cool place, well covered.
Switch the appliance off and remove the plug from the mains, or switch off or turn out
the circuit breaker or fuse.
Clean the appliance and the interior accessories with a cloth and lukewarm water.
Commercially available dish washing detergents may also be used.
After cleaning wipe with fresh water and rub dry.
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the appliance once a year
with a soft brush or a vacuum cleaner.
Check the water drain hole on the rear wall of the refrigerator compartment.
Clear a blocked drain hole with the aid of something like soft green peg, be careful not
to make any damage to the cabinet by sharp things.
After everything is dry place appliance back into service.
Energy Saving tips
1. Do not place warm foods into the appliance. Allow warm foods to cool first. Do not
install the a ppliance near cookers, radiators or other sources of warmth. High ambient
temperatures cause longer, more frequent operation of the compressor.
2. In order to make the cooling system work efficiently, please make sure the side
plates and back plate of the product are with some distance from the wall. It is
strongly recommended that its back is 75mm away from the wall, its sides at least have
a space of 100mm separately and the height from over its top is not less than 100mm.
3. When the product works, p lease do not open the door too often or leave the door
open any longer than necessary.
20
