633772
23
Zoom out
Zoom in
Previous page
1/134
Next page
The refrigerant and risk of fire
Installing your new appliance
Ventilation of appliance
75
100
100
Before using the appliance for the first
time, you should be informed of the
following tips.
In order to improve efficiency
of the cooling system and save
energy, it is necessary to maintain
good ventilation around the appliance
for the dissipation of heat. For this
reason, sufficient clear space should
be available around the refrigerator.
Suggest :It is advisable for there to be
at least 75mm of space from the back
to the wall, at least 100mm from its
top,at last 100mm from its side to the
wall and a clear space in front to allow
the doors to open 135°. As shown in
following diagrams.
Note:
This appliance performs well within
the climate class showed in the table
below.
in the refrigerant circuit. Check
thecompressor labe
l on the rear of the
appliance to see which refrigerant is
used for your appliance.
If the appliance contains iso-butane
(R600a) refrigerant, which is
environmentally friendly but flammable,
ensure that tubing of the refrigerant
circuit is not damaged during
transportation and installation to avoid
risk of fire caused by leaking
refrigerant.
Keep burning candles, lamps and
other items with naked flames and
sources of ignition away from the
appliance and ventilate the room
thoroughly to avoid the risk of fire and
eye injury should any leakage of
refrigerant (R600a) exist.
Do not store products which contain
flammable propellants (e.g. spray
cans) or explosive substances in the
appliance.
The room space must be at least 1
per 8g of refrigerant (R600a). The
amount of refrigerant in your appliance
is indicated on the rating plate inside.
Switch off the appliance and
disconnect it from the mains power
before you c
lean or move it.
Never unplug the appliance by pulling
on the electrical cord. Always grip the
plug firmly and pull straight out from
the socket to prevent damaging the
power cord.
Do not operate the appliance without
the light cover of interior lighting.
Any electrical component must be
replaced or repaired by a qualified
electrician or authorized service
engineer. Only genuine spares should
be used.
Do not use electrical appliances such
as ice cream makers inside the food
storage compartments of the
appliance, unless they are approved
by the manufacturer.
Do not look direct into the LED light
located in the refrigerator compartment
with optical instruments to avoid eye
injuries. If it is not functioning correctly,
consult a qualified
, registered
e
lectrician or replace it in accordance
with the “cleaning and care” chapter.
The appliance contains a
small quantity of refrigerant
(R600a or R134a)
100
100
Hisense Refrigerator
4
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hisense KG 325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hisense KG 325 in the language / languages: German as an attachment in your email.

The manual is 23,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info