474121
14
Zoom out
Zoom in
Previous page
1/26
Next page
Main Source
: Move
OK : Select
Analog TV
Digital TV
VID/SVID1
VID/SVID2
Component1
Component2
PC
HDMI1
HDMI2
HDMI3
Power ON/OFF
ØTurning on: Connect the TV an AC power outlet and turn on the power switch located below the front right hand
side of unit. The power indicator will be initial red and then will change to blue. A few seconds later image will appear
on the screen.
ØTurning off to standby mode: Press the [ ]button on the front panel or on the remote control to switch standby
mode. You can activate the unit again by pressing the [ ] button.
ØPower indicator:
Red indicates standby mode.
Blue shows that the unit is on.
There will no light when the power switch is in off position.
Notes:
Turn the power switch off when you do not intend to use the TV for long periods, for example overnight. Remove the
connection from the wall power outlet if you do not intend to use the unit for longer periods, for example if you plan to
be away a few days.
Wait at least 5 seconds after turning off if you want to re-start the TV.
Signal source selection
[SOURCE] button: Press the [SOURCE] button and press [P+/P-] button to select signal input, press [OK] to confirm
selection.
[HDMI] button: press [HDMI] button to select HDMI signal input.
[YPBPR] button: press [YPBPR] button to select Component signal input.
[D/A] button: press [D/A] button to switch Digital/Analog signal input.
Select channels
You can select channels by press [P+/-] on the remote or press [CH / ] on the front panel
of TV.
Select channels by numbers
Input channel numbers sequentially to select channels by program numbers.
For example, to select channel 120, press the button 1, and 1will be displayed on the top right corner of the screen,
then press the button 2, 12 will be displayed, press the button 0, channel 120 will now appear on screen.
[VOL ] or [VOL ]
Adjust Volume
Press on the front panel of TV or press [v-/v+] on the remote to adjust volume.
Use [LAST] button
Press [ LAST ] button repeatedly to alternate between the present program and the previous in both the
same and different signals source.
program
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hisense HSLC8129HDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hisense HSLC8129HDI in the language / languages: English as an attachment in your email.

The manual is 6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info