505743
31
Zoom out
Zoom in
Previous page
1/44
Next page
31
Advanced Features
Wireless Setting
How to set up automatically
1.Turn on your TV, operate according to the description
in the Settings menu until the Network screen appears.
2.On the Network screen, select Configuration and press
[OK] button to enter the submenu.
3.Set Internet Connection to On and Interface to Wireless
4.Select Wireless Setting and press [OK] button to enter
it.
You can select: Scan\Manual\Auto
5.If you select Scan, a screen will appear listing all of the
wireless networks within range of the TV. Use the [/]
keys to select the wireless network with your router
SSID and press [OK] to confirm. Proceed to Step 7.
6.If you select Manual, a screen will appear prompting
you to enter the SSID of your wireless network. Press
[OK] and an on-screen keyboard will pop up. Enter the
SSID and select OK. Press [OK] to confirm and a
screen will appear prompting you select the security
mode for your wireless network. Use the [/] keys to
select the proper security mode and press [OK] to
confirm. If you selected None for the security mode,
proceed to step 9.
7.A screen will appear prompting you to enter the
password for the selected security mode. Press [OK]
and an on-screen keyboard will pop up. Enter the
password and select OK. Press [OK] to confirm.
Proceed to Step 9.
8.If you select Auto, a screen will appear prompting you
to select PIN (personal identification number) or PBC
(push button configuration) setup. Choose the method
supported by your wireless access point.
8a.If you choose PIN, an identification number will appear
on the screen for you to enter into the access point.
After entering the PIN, press the [] key. If the PIN is
in use by another device, select [REFRESH] to obtain
a new PIN and enter it into the access point. After
entering the PIN, press the [] key.
8b.If you choose PBC, a screen will appear prompting to
press [] key. After pressing the [►] key you have two
minutes to locate and press the Push Button on your
access point to connect to the TV.
9.Press the [MENU] key to return to the previous menu.
10.Select Connection Test to check the Internet
connectivity.
Network setup:
1. Turn on your TV, operate according to the description in the
Settings menu until the Network screen appears.
2. On the Network screen, select Configuration and press [OK]
button to enter the submenu.
3. Set Internet Connection to On and Interface to Ethernet.
4. Select IP Setting and press [OK] to enter it.
5. Set Address Type to Auto.
6. Auto acquires and enters the needed internet values
automatically.
7. If the Network function has not acquired the network
connection values, go to the directions for Manual.
8. If set Address Type to Manual, enter IP Setting . Then
press[/▼] to select IP Address and press [◄/►] to move
the cursor to the entry field. Then press [0~9] buttons to
enter the numbers.
9. Press [/▼] to select the next options to enter the
numbers.
10. When done, press [MENU] to return to the previous menu.
11. Select Connection Test to check the internet connectivity.
If the test is not successful, please check whether the
configuration is correct. If the test is successful, operate
as the following instructions.
Set DLNA/DMR to On:
1. On the Network screen, select Applications and press
[OK] to enter the submenu.
2. Press [◄/►] to set DLNA/DMR to On.
DLNA Settings
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto
176. 16. 0. 0
255. 255. 255. 255
172. 16. 0. 0
172. 16. 2. 2
0. 0. 0. 0
Settings
Select
Back
MENU
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Manual
176. 16. 0. 0
255. 255. 255. 255
172. 16. 0. 0
172. 16. 2. 2
0. 0. 0. 0
Settings
Select
Back
MENU
Input
0~9
If your computer can not support DLNA, you need install the
software that supports DLNA such as TVersity and Windows
Media Player11. It is recommended to select Windows Media
Player11 to set and the setup is more simple.
The Network setup on the TV’s screen:
DLNA
DMR
On
On
Settings
Select
Back
MENU
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hisense HL55XT710PZLN3D - 710 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hisense HL55XT710PZLN3D - 710 series in the language / languages: English as an attachment in your email.

The manual is 10,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info