485399
5
Zoom out
Zoom in
Previous page
1/23
Next page
2) CONNECTING TO THE
Y
OUR VCR
To connect a VCR, the receiver has been provided with RCA. By a RCA cable, the VCR
can be connected to the receiver.
3) CONNECTING EXTERNAL Hi-Fi AUDIO SYSTEM
To connect any external Audio Hi-Fi system, the receiver has been provided with two RCA
connectors at the back of the receiver, marked with “L” and “R” respectively to connect the
left and right audio.
4) CONNECTING TO THE OTHER RECEIVER
Connect the antenna cable to the ANTENNA socket on the Receiver. With other connector,
connect the LOOP OUT socket on the Receiver to the ANTENNA socket of the other
Receiver.
2)
NSCHLIESSEN EINES VIDEORECORDERS
Wenn Sie einen VCR (Videorecorder) anschließen wollen, können Sie die VCR SCART
Buchse bzw. RCA Buchsen benutzen.
3) ANSCHLIESSEN EINES Hi-Fi AUDIO SYSTEMS
Zur Verbindung des externen Audi Hi-Fi Systems können Sie die zwei RCA-Verbindungen
auf der Rückseite des Receivers benutzen, die mit L und R gekennzeichnet sind.
4) WEITERSCHLEIF DES SATELLITENSIGNALS ZU EINEM WEITEREN RECEIVER
Verbinden Sie das Satellitenantennenkabel mit dem LNB IN-Anschluß des Receivers.
Verbinden Sie den IF OUT Anschluß des ersten Receivers mit dem LBN IN Anschluß des
zweiten Receivers.Bitte beachten Sie, dass ein Standard LNB oder Multischalter nur
Steuersignale von einem Receiver verarbeiten kann. Bei Einkabellösungen benötigen Sie
ein entsprechendes LNB oder ein entsprechender Multischalter.
7
3.1. AUFSTELLORT DES RECEIVERS
Ihr Receiver sollte an einer Stelle mit guter Belüftung positioniert werden.
Stellen Sie das Gerät nicht in einem geschlossenen Schrank bzw. an einem Ort mit
begrenzter Luftzufuhr auf, weil dies zur Überhitzung führen kann.
Ferner darf das Gerät nicht direkter Sonneneinstrahlung, Feuchtigkeit, grober Handhabung
oder Haustieren ausgesetzt werden.
Stellen Sie keine elektronischen Geräte auf den
Receiver. Verlegen Sie alle Kabel so dass sie leicht zugänglich und zu keiner Gefährdung
von Personen und Haustieren kommen kann.
3. RECEIVER ANSCHLIESSEN
Schließen Sie nicht die Netzeinspeisung an, solange Sie nicht alle
Verbindun
g
en an
g
eschlossen haben.
2.3. Fernbedienung
3.2.
A
NSCHLIESSEN DER SAT
A
NTENNE
Nachdem Sie Ihr Satantennensystem installiert haben, verbinden Sie mittels eines
Koaxialkabels den LNB Ihrer Antenne mit der LNB IN Buchse an der Rückseite des
Receivers. Alle Kabelanschlüsse müssen mit der Hand auf festen Sitz kontrolliert werden.
Verwenden Sie nur Koaxialkabel mit 75 Impedanz und dazupassende Stecker des Typs
F.
8
3.3.
A
NSCHLISSEN EXTERNER GER
Ä
TE
1) MIT DEM FERNSEHER VERBINDEN
Wenn Sie den Receiver mit dem Fernseher verbinden wollen, müssen Sie eine der
folgenden Schittstellen benutzen:
- Video: SCART, RCA(gelb), Component, S-Video, HDMI
- Audio: SCART, RCA(rot/weiss), S/PDIF, HDMI
RECEIVER ANSCHLIESSEN
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hirschmann S-HD910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hirschmann S-HD910 in the language / languages: German as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info