731820
14
Zoom out
Zoom in
Previous page
1/220
Next page
Network Video Recorder User Manual
13
One-key disarms the linkage actions of the alarm input;
PTZ linking for the VCA alarm;
VCA detection alarm is supported except DS-7100 series;
Support 1-ch facial detection and capture (HD analog camera) for iDS-7200HQHI-K/S(B), iDS-
7200HQHI-M/S, iDS-7200HUHI-K/4S(B) and iDS-7200HUHI-M/S series;
Supports POS triggered alarm;
Supports coaxial alarm;
System will automatically reboot when a problem is detected in an attempt to restore normal
functionality;
You can enable false alarm filer for the motion detection of the PIR cameras. Then only when
the motion detection events and PIR events are both triggered, the motion detection alarm
will be triggered.
Other Local Functions
Operable by mouse and remote control;
Three-level user management; admin user can create many operating account and define their
operating permission, which includes the permission to access any channel;
Completeness of operation, alarm, exceptions and log writing and searching;
Manually triggering and clearing alarms;
Importing and exporting of configuration file of devices;
Getting cameras type information automatically;
Unlock pattern for device login for the admin;
Clear-text password available;
GUID file can be exported for password resetting;
Security question and reserved email can be configured for password resetting;
Multiple connected analog cameras supporting Turbo HD or AHD signal can be upgraded
simultaneously via DVR.
Network Functions
Self-adaptive 100M or 1000M network interface;
IPv6 is supported;
TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SNMP (for 7304/7308/7316HQHI/HUHI
and 9008/9016HUHI and DS-7300/8100/9000HTHI-K series DVR), SMTP, NFS, iSCSI, UPnP
and HTTPS are supported;
Supports access by Hik-Connect. If you enable Hik-Connect, the device will remind you the
internet access risk and ask you to confirm the “Terms of Service” and “Privacy Statement”
before enabling the service. You should create a verification code to connect to the Hik-
Connect;
TCP, UDP and RTP for unicast;
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision iDS-7208HQHI-K2-4S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision iDS-7208HQHI-K2-4S in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info