662587

Hikvision DS-KH6310 - Video Intercom Indoor Station Manual

36
Zoom out
Zoom in
Previous page
1/42
Next page
Video Intercom Indoor Station
Quick Start Guide
UD02902B
Video Intercom Indoor Station·Quick Start Guide
i
Quick Start Guide
© 2016 Hangzhou Hikvision Digital Technology Co., Ltd.
This quick start guide is intended for users of the models below:
Series
Model
Indoor Station (6-Series)
DS-KH6310-W
DS-KH6310
DS-KH6310-WL
DS-KH6210-L
Indoor Station (8-Series)
DS-KH8301-WTS
DS-KH8301-WT
DS-KH8300-T
It includes instructions on how to use the Product. The software embodied in the
Product is governed by the user license agreement covering that Product.
About this Manual
This Manual is subject to domestic and international copyright protection. Hangzhou
Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all rights to this manual. This
manual cannot be reproduced, changed, translated, or distributed, partially or wholly, by
any means, without the prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and are
registered trademarks or the subject of applications for the same by Hikvision and/or its
affiliates. Other trademarks mentioned in this manual are the properties of their
respective owners. No right of license is given to use such trademarks without express
permission.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL.
HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE
USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY OF INFORMATION
CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY RELIANCE ON THIS MANUAL SHALL BE
WHOLLY AT YOUR OWN RISK AND RESPONSIBILITY.
Video Intercom Indoor Station·Quick Start Guide
ii
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS OF DATA
OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR RELIANCE ON THIS MANUAL, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY OR CERTAIN
DAMAGES, SO SOME OR ALL OF THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
Support
Should you have any questions, please do not hesitate to contact your local dealer.
0104001060827
Video Intercom Indoor Station·Quick Start Guide
iii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable harmonized
European standards listed under the EMC Directive 2004/108/EC, the
RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot
be disposed of as unsorted municipal waste in the European Union. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point.
For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
Video Intercom Indoor Station·Quick Start Guide
iv
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
Please use the power adapter, which is provided by normal company. The power
consumption cannot be less than the required value.
Do not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the
power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the device yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
Cautions
Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or
places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specification of the device for the
detailed operating temperature), cold, dusty or damp locations, and do not expose it to
high electromagnetic radiation.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater
or radiator is forbidden (ignorance can cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor
at the same time.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
Video Intercom Indoor Station·Quick Start Guide
v
Please use the provided glove when open up the device cover, avoid direct contact with
the device cover, because the acidic sweat of the fingers may erode the surface coating
of the device cover.
Please use a soft and dry cloth when clean inside and outside surfaces of the device
cover, do not use alkaline detergents.
Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device and
lead to additional costs.
Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
Video Intercom Indoor Station·Quick Start Guide
vi
Table of Contents
1 Appearance ............................................................................................................... 1
1.1 Appearance of DS-KH8301-WTS/DS-KH8301-WT/ DS-KH8300-T ............................. 1
1.2 Appearance of DS-KH6310-W/DS-KH6310 .............................................................. 2
1.3 Appearance of DS-KH6310-WL/DS-KH6210-L .......................................................... 3
2 Terminals and Interfaces ........................................................................................... 5
2.1 Terminals and Interfaces of DS-KH8301-WTS/ DS-KH8301-WT/DS-KH8300-T ......... 5
2.2 Terminals and Interfaces of DS-KH6310-W/ DS-KH6310 .......................................... 6
2.3 Terminals and Interfaces of DS-KH6310-WL/ DS-KH6210-L ..................................... 7
3 Installation and Wiring .............................................................................................. 8
3.1 Indoor Station Installation ....................................................................................... 8
3.1.1 Wall Mounting Plate .......................................................................................... 8
3.1.2 Wall Mounting with Junction Box ..................................................................... 8
3.2 Indoor Station Wiring ............................................................................................ 10
3.2.1 Wiring of DS-KH8301-WTS/ DS-KH8301-WT/DS-KH8300-T............................. 10
3.2.2 Wiring of DS-KH6310-W/DS-KH6310 .............................................................. 11
3.2.3 Wiring of DS-KH6310-WL/DS-KH6210-L .......................................................... 12
4 Before You Start ...................................................................................................... 14
5 Local Operation ....................................................................................................... 15
5.1 Activating Device Locally ....................................................................................... 15
5.2 User Interface Description ..................................................................................... 16
5.2.1 User Interface of Indoor Station ...................................................................... 16
5.2.2 User Interface of Indoor Extension ...................................................................17
5.2.3 Status of Indoor Station .................................................................................. 18
5.2.4 Status of Indoor Extension .............................................................................. 19
5.3 Configuration Settings ........................................................................................... 20
5.3.1 Changing Configuration Password ................................................................... 20
5.3.2 Setting Local Information ................................................................................ 20
5.3.3 Setting Network .............................................................................................. 22
5.3.4 Adding Device ................................................................................................. 23
5.4 Calling Resident ..................................................................................................... 26
6 Remote Operation (Batch Configuration Tool) ......................................................... 28
6.1 Activating Device Remotely ................................................................................... 28
6.2 Editing Network Parameters .................................................................................. 29
6.3 Adding Device ........................................................................................................ 30
6.3.1 Adding Online Device ...................................................................................... 30
6.3.2 Adding by IP Address ....................................................................................... 31
Video Intercom Indoor Station·Quick Start Guide
vii
Appendix ................................................................................................................... 33
Installation Notice ....................................................................................................... 33
Wiring Cables .............................................................................................................. 33
Video Intercom Indoor Station·Quick Start Guide
1
1 Appearance
1.1 Appearance of DS-KH8301-WTS/DS-KH8301-WT/
DS-KH8300-T
Figure 1-1 Front Panel
Table 1-1 Components Description
No.
Description
1
Built-in Camera (Only
DS-KH8301-WT supports)
2
Power Supply Indicator
3
Information Indicator
4
Alarm Indicator
5
SOS Touch Key
6
Unlock Touch Key
7
Live View Touch Key
8
Management Center Touch Key
9
LCD Display Screen
10
Microphone
Figure 1-2 Rear Panel
Table 1-2 Components Description
No.
Description
11
TF Card Slot
12
Serial Port
13
Mechanical Switch
14
Power Supply Indicator
15
Network Interface
16
Loudspeaker
Hold down the SOS touch key to trigger a SOS alarm and upload the alarm message to
the management center (iVMS-4200 client software or the master station).
The Unlock key ( ) is valid only when does the indoor station speak with the door
station or open the live view of the door station.
Video Intercom Indoor Station·Quick Start Guide
2
1.2 Appearance of DS-KH6310-W/DS-KH6310
Figure 1-3 Front Panel
Table 1-3 Components Description
No.
Description
1
Power Supply Indicator
2
Information Indicator
3
Alarm Indicator
4
SOS Key
5
Unlock Key
6
Live View Key
7
Management Center Key
8
LCD Display Screen
9
Microphone
Figure 1-4 Rear Panel
Table 1-4 Components Description
No.
Description
10
Power Supply Interface
11
Network Interface
12
Terminals
13
Loudspeaker
Hold down the SOS key to trigger a SOS alarm and upload the alarm message to the
management center (iVMS-4200 client software or the master station).
The Unlock key ( ) is valid only when does the indoor station speak with the door
station or open the live view of the door station.
Video Intercom Indoor Station·Quick Start Guide
3
1.3 Appearance of DS-KH6310-WL/DS-KH6210-L
Figure 1-5 Front Panel
Table 1-5 Components Description
No.
Description
1
Power Supply Indicator
2
Information Indicator
3
Alarm Indicator
4
SOS Key
5
Unlock Key
6
Live View Key
7
Management Center Key
8
LCD Display Screen
9
Microphone
Figure 1-6 Rear Panel
Table 1-6 Components Description
No.
Description
10
Power Supply
11
Network Interface
12
Terminals
13
Loudspeaker
Hold down the SOS key to trigger a SOS alarm and upload the alarm message to the
management center (iVMS-4200 client software or the master station).
The Unlock key ( ) is valid only when does the indoor station speak with the door
station or open the live view of the door station.
For DS-KH6210-L indoor station, there are different meanings when you press or hold
down the four mechanical keys.
Video Intercom Indoor Station·Quick Start Guide
4
Keys
Hold Down
Press
SOS Key
Return Key
Direction Keys▲and◄/Unlock Key
Live View Key Alarm
Direction Keys▼and►
Management Center Key
Confirm Key
Video Intercom Indoor Station·Quick Start Guide
5
2 Terminals and Interfaces
2.1 Terminals and Interfaces of DS-KH8301-WTS/
DS-KH8301-WT/DS-KH8300-T
Figure 2-1 Terminals of DS-KH8301-WTS/DS-KH8301-WT/DS-KH8300-T
Table 2-1 Descriptions of Terminals and Interfaces
Name
No.
Interface
Description
485
Communication
Port
A1
RS485B+
RS-485 Communication Interfaces
A2
RS485B-
A3
RS485A+
A4
RS485A-
Grounding
A5
GND
Grounding
A6
GND
Grounding
ALARM OUT
(Alarm Output)
A7
COM1
Alarm Relay Output Terminal 1 (Dry Contact)
A8
NO1
A9
COM2
Alarm Relay Output Terminal 2 (Dry Contact)
A10
NO2
ALARM IN
(Zone Input)
B1
JIN8
Zone Detector Input Terminal 8
B2
JIN7
Zone Detector Input Terminal 7
B3
JIN6
Zone Detector Input Terminal 6
B4
JIN5
Zone Detector Input Terminal 5
B5
GND
Grounding
B6
GND
Grounding
Video Intercom Indoor Station·Quick Start Guide
6
Name
No.
Interface
Description
B7
JIN4
Zone Detector Input Terminal 4
B8
JIN3
Zone Detector Input Terminal 3
B9
JIN2
Zone Detector Input Terminal 2
B10
JIN1
Zone Detector Input Terminal 1
2.2 Terminals and Interfaces of DS-KH6310-W/
DS-KH6310
Figure 2-2 terminals of DS-KH6310-W/DS-KH6310
Table 2-2 Descriptions of Terminals and Interfaces
Name
No.
Interface
Description
Terminals
A1
RS485-
RS-485 Communication Interfaces
A2
RS485+
A3
AIN1
Zone Detector Input Terminal 1
A4
AIN2
Zone Detector Input Terminal 2
A5
AIN3
Zone Detector Input Terminal 3
A6
AIN4
Zone Detector Input Terminal 4
B1
AIN5
Zone Detector Input Terminal 5
B2
AIN6
Zone Detector Input Terminal 6
B3
AIN7
Zone Detector Input Terminal 7
B4
AIN8
Zone Detector Input Terminal 8
B5
AOUT
Alarm Relay Output
B6
GND
Grounding
Video Intercom Indoor Station·Quick Start Guide
7
2.3 Terminals and Interfaces of DS-KH6310-WL/
DS-KH6210-L
Figure 2-3 Terminals of DS-KH6310-WL/DS-KH6210-L
Table 2-3 Terminals Description
Name
No.
Interface
Description
Terminals
A1
AIN1
Zone Detector Input Terminal 1
A2
AIN2
Zone Detector Input Terminal 2
A3
GND
Grounding
Video Intercom Indoor Station·Quick Start Guide
8
3 Installation and Wiring
Before you start:
Make sure the device in the package is in good condition and all the assembly parts
are included.
The power supply the indoor station supports is 12 VDC. Please make sure your
power supply matches your indoor station.
Make sure all the related equipment is power-off during the installation.
Check the product specification for the installation environment.
3.1 Indoor Station Installation
The wall mounting plate and the junction box are required to install the indoor station
onto the wall. Junction boxes for 8-series and 6-series indoor stations are the same.
3.1.1 Wall Mounting Plate
60 mm
102 mm
127 mm
100 mm
27 mm
44.5 mm
70 mm
Figure 3-1 Wall Mounting Plate
The dimension of junction box should be 75 mm (width) × 75 mm (length) × 50 mm
(depth).
3.1.2 Wall Mounting with Junction Box
Wall mounting installations are the same for the 6-series indoor stations and the
8-series indoor stations. Here we take the wall mounting of DS-KH6310 model as an
example.
Video Intercom Indoor Station·Quick Start Guide
9
Steps:
1. Chisel a hole in the wall. The size of the hole should be 76 mm (width) × 76 mm
(length) × 50 mm (depth).
2. Insert the junction box to the hole chiseled on the wall.
3. Fix the wall mounting plate to the junction box with 2 screws.
Screws
Wall Mounting
Plate
Junction Box
Figure 3-2 Installing the Plate
4. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks
into the slots on the rear panel of the indoor station, during which the lock catch will
be locked automatically.
Hooks
Slot Slot
Lock Catch
Figure 3-3 Hooking the Indoor Station to the Plate
Video Intercom Indoor Station·Quick Start Guide
10
3.2 Indoor Station Wiring
3.2.1 Wiring of DS-KH8301-WTS/ DS-KH8301-WT/DS-KH8300-T
Figure 3-4 Wiring of DS-KH8301-WTS/DS-KH8301-WT/DS-KH8300-T Indoor Station
Video Intercom Indoor Station·Quick Start Guide
11
3.2.2 Wiring of DS-KH6310-W/DS-KH6310
Figure 3-5 Wiring of DS-KH6310-W/DS-KH6310 Indoor Station
Video Intercom Indoor Station·Quick Start Guide
12
3.2.3 Wiring of DS-KH6310-WL/DS-KH6210-L
Figure 3-6 Wiring of DS-KH6310-WL/DS-KH6210-L Indoor Station
Video Intercom Indoor Station·Quick Start Guide
13
Descriptions of Indoor Station interfaces are shown in the following table.
Interface
Description
ALARM IN
Connect alarm device, with one end of the device connecting
to JINx and the other end connecting to GND (x indicates
number between 1~8).
ALARM OUT
Connect alarm output devices.
GND 12V
Connect to DC power supply 12V.
LAN
Network port of indoor station. Connect the indoor station to
the same LAN with the door station. (Support POE)
Video Intercom Indoor Station·Quick Start Guide
14
4 Before You Start
For the first time use of the device, you are required to activate the device and set the
device password. You can activate the device on the UI, via internet with Batch
Configuration Tool, or with iVMS-4200 client software.
To activate the device on the UI, refer to chapter 5 and enter the
configuration password.
To activate the device with Batch Configuration Tool or iVMS-4200, refer
to 6.1 and the user manual in the disk.
To configure the key parameters of device on the user interface of indoor station, you
are required to input the admin password.
The default admin configuration password is 888999.
The default unlocking password and arming/disarming password are 123456;
The default duress code is 654321.
You must change these default credentials to protect against unauthorized access to the
product. Please refer to the user manual for changing passwords.
Video Intercom Indoor Station·Quick Start Guide
15
5 Local Operation
Here the local operation of indoor stations with touch screen is taken as example.
The DS-KH6210-L should be operated with physical keys. The SOS key works as a
return key; the Unlock key works as direction keys ▲and◄ to turn up and left; the
Live View key works as direction keys ▼and► to turn down and right; and the
Management Center key works as a confirm key.
5.1 Activating Device Locally
Steps:
1. Power on the device to enter the activation interface automatically.
Figure 5-1 Activation Interface (DS-KH8301-WT)
2. Create a password and confirm it.
3. Press the OK button to activate the device.
STRONG PASSWORD RECOMMENDED– We highly recommend you to create a strong
password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of
your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or weekly can
better protect your product.
Video Intercom Indoor Station·Quick Start Guide
16
You must create a password to activate the device for your first time usage and when
it is not activated.
Only when the device is activated, can you operate it locally and remotely.
Here the activation interface of DS-KH8301-WT indoor station is taken as example.
5.2 User Interface Description
5.2.1 User Interface of Indoor Station
Figure 5-2 User Interface of Indoor Station (Page 1)
Figure 5-3 User Interface of Indoor Station (Page 2)
Video Intercom Indoor Station·Quick Start Guide
17
Slide left and right to realize the switch between two interface pages (except for
DS-KH6210-L).
Here the user interface of DS-KH8301-WT is taken as as example.
Only DS-KH8301-WTS/DS-KH8301-WT/DS-KH8300-T indoor stations support TF card.
DS-KH6210-L only has one interface page.
Figure 5-4 User Interface of DS-KH6210-L
5.2.2 User Interface of Indoor Extension
Figure 5-5 User Interface of Indoor Extension
Video Intercom Indoor Station·Quick Start Guide
18
Only DS-KH8301-WTS/DS-KH8301-WT/DS-KH8300-T indoor extensions support TF
card.
Here the user interface of DS-KH8301-WT indoor extension is taken as example.
5.2.3 Status of Indoor Station
Table 5-1 Description of Status Icons
Icon
Definition
Description
Normal Status.
The communication between indoor station,
door station and master station is normal.
And the communication between indoor
station and indoor extension is normal.
The indoor
station is offline.
Please check the network cable or Wi-Fi
connection.
Exception occurs
in the
communication
with door
station.
Room No. conflict. Configure the Room No.
again.
Invalid Room No.. Configure the Room No..
Invalid main door station IP address. Configure
the main door station IP address.
Network of door station is abnormal. Check the
network connection of main door station.
Communication of door station is abnormal.
Check if the door station IP address is correct.
The indoor
station has not
registered in the
SIP server.
Invalid SIP server IP address. Set the SIP server
IP address.
Network of SIP server is not available. Check
the SIP server network connection.
SIP server communication is not available.
Check if the SIP server IP address is correct.
SIP server rejected to login the device. Check if
the device No. has been registered.
The indoor
station IP
address conflicts
with that of
other device.
Please check the IP address.
Video Intercom Indoor Station·Quick Start Guide
19
Icon
Definition
Description
TF card is
inserted in the
indoor station.
Only DS-KH8301-WTS/DS-KH8301-WT/
DS-KH8300-T Models support the TF card
function.
Exception occurs
with the TF card.
No TF card is
inserted in the
indoor station.
5.2.4 Status of Indoor Extension
Table 5-2 Description of Status Icons
Icon
Definition
Description
Normal Status.
The communication between indoor station
and indoor extension is normal.
The indoor
extension is
offline.
Please check the network cable or Wi-Fi
connection.
The indoor
extension IP
address conflicts
with that of
other device.
Please check the IP address.
The indoor
extension has
not connected
to the indoor
station.
Invalid indoor station IP address. Set the indoor
station IP address.
Network of indoor station is not available.
Check the indoor station network connection.
The indoor extension number conflicts with
number of another indoor extension.
TF card is
inserted in the
indoor station.
Only DS-KH8301-WTS/DS-KH8301-WT/
DS-KH8300-T Models support the TF card
function.
Exception occurs
with the TF card.
Video Intercom Indoor Station·Quick Start Guide
20
Icon
Definition
Description
No TF card is
inserted in the
station station.
5.3 Configuration Settings
Purpose:
On the configuration settings interface, you can set and view the local information,
configure the network, manage devices, synchronize the device time, and restore the
default settings.
You can get to the configuration interface: Settings > Configuration.
5.3.1 Changing Configuration Password
The configuration password is required when you set the indoor station locally, such as
the local information checking, the network settings, device connection, time settings,
and default settings restoring.
Steps:
1. Press the Settings tab on the touch screen and press the Edit tab to change the
password.
2. Enter the old password to change it.
3. Enter a new password and confirm it.
The configuration password is also called admin password on the device.
The default configuration password (admin password) is 888999.
5.3.2 Setting Local Information
Steps:
1. Get to the configuration interface: Settings > Configuration, and enter the admin
password (configuration password).
2. Press the Local Info tab, and select the indoor station type: Indoor Station, or Indoor
Extension.
Indoor Station: Set the Room No.
Indoor Extension: Set the Extension No., and set a room name.
Video Intercom Indoor Station·Quick Start Guide
21
Figure 5-6 Local Information Settings (Indoor Station)
Figure 5-7 Local Information Settings (Indoor Extension)
3. Press the drop-down list to select a video standard: PAL, or NTSC.
4. Set the maximum live view duration of the device.
The Extension No. is numeric from 1 to 5, i.e., up to 5 indoor extensions can connect
to one indoor station.
Video Intercom Indoor Station·Quick Start Guide
22
Only DS-KH8301-WT, DS-KH8301-WTS and DS-KH8501-WT require setting the video
standard, and the system will reboot after selecting video standard.
The maximum live view duration varies from 10 seconds to 60 seconds.
5.3.3 Setting Network
Purpose:
Network connection is mandatory for the use of the indoor station.
Steps:
1. Get to the configuration interface: Settings > Configuration, and enter the admin
password (configuration password).
2. Press the Network tab to enter the network settings interface.
Figure 5-8 Network Interface
3. Press the tab to pop up network settings dialogue box.
Figure 5-9 Setting Network
4. Enter a local IP address, subnet mask, and gateway.
Video Intercom Indoor Station·Quick Start Guide
23
5. Press the tab to save the settings.
Enable DHCP function to obtain an IP address automatically.
Enable Same LAN function if indoor stations and indoor extensions are in the same
local area network with other video intercom devices in a community, or the indoor
extensions will not work normally.
5.3.4 Adding Device
Adding Device (Indoor Station)
Purpose:
The indoor station never works alone. You can connect the main door station, IP camera,
SIP server, SCP (Security Control Panel), DVR/DVS/NVR, and so on. Once connected,
those devices can work together as a whole video intercom system.
The DS-KH6210-L indoor station does not support adding IP camera, DVR/DVS/NVR,
or doorphone.
Connecting the main door station and adding IP camera will be introduced in the
Quick Start Guide. For further information about SIP server setting, SCP (security
control panel) settings, DVR/DVS/NVR settings, and doorphone settings, please refer
to the user manual in the disk.
Connecting Main Door Station
Steps:
1. Get to the configuration interface: Settings > Configuration, and enter the admin
password (configuration password).
2. Press the Device tab to enter the device management interface.
3. Press the Main Door Station tab to pop up the device information dialogue box.
Video Intercom Indoor Station·Quick Start Guide
24
Figure 5-10 Main Door Station Adding Interface (Indoor Station)
4. Select the main door station type: D Series, or V Series.
5. Enter the IP address of the main door station, and press the tab to save the
settings.
Adding IP Camera
Steps:
1. Get to the configuration interface: Settings > Configuration, and enter the admin
password (configuration password).
2. Press the Device tab to enter the device management interface.
3. Press the Add Device tab.
Video Intercom Indoor Station·Quick Start Guide
25
Figure 5-11 Device Selecting Interface (Indoor Station)
4. Press the IP Camera tab to pop up the IP camera adding dialogue box.
Figure 5-12 IP Camera Adding Interface
5. Enter the device name, IP address, Port No., user name, and password.
6. Press the tab to save the settings.
The default port No. is 554, and the default user name is admin.
When the IP camera is added successfully, you can get the live view of IP camera on
the live view interface.
The highest resolution of the IP camera added to the indoor station is 1280 x 720 @
30 fps, and the video compression standard of the IP camera should be H.264.
Video Intercom Indoor Station·Quick Start Guide
26
Adding Device (Indoor Extension)
Indoor extension can only connect to the indoor station.
Steps:
1. Get to the configuration interface: Settings > Configuration, and enter the admin
password (configuration password).
2. Press the Device tab to enter the device management interface.
3. Press the Indoor Station tab to pop up the device information dialogue box.
Figure 5-13 Indoor Station Adding Interface (Indoor Extension)
4. Enter the IP address of the indoor station, and press the tab to save the settings.
5.4 Calling Resident
Steps:
1. Press the tab on the touch screen to enter the residents calling
interface.
2. Enter the corresponding resident’s Room No..
3. Press the tab to start an audiovisual call.
4. Press the tab to stop the audiovisual call.
Generally speaking, Room No. format should be like 1-2-3-405 as Community 1,
Building 2, Unit 3, and Room 405. The community No. can be omitted.
Switch to on the upper right corner to enable the camera function.
The Room No. can be automatically saved into the contact list.
Video Intercom Indoor Station·Quick Start Guide
27
Indoor extension does not support this function.
On the call resident interface of DS-KH6210-L, there is no Contact List, Call Elevator, or
Call Center tab.
Figure 5-14 Call Resident Interface
Video Intercom Indoor Station·Quick Start Guide
28
6 Remote Operation (Batch Configuration
Tool)
6.1 Activating Device Remotely
Purpose:
You are required to activate the device first by setting a strong password for it before
you can use the device.
Activation via Batch Configuration Tool, and Activation via iVMS-4200 are supported.
Here take activation via Batch Configuration Tool as example to introduce the device
activation. Please refer to the user manual for the activation via iVMS-4200.
Steps:
1. Run the Batch Configuration Tool.
Figure 6-1 Selecting Inactive Device
2. Select an inactivated device and click the Activate button.
Figure 6-2 Creating Activation Password
3. Create a password, and confirm the password.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision DS-KH6310 - Video Intercom Indoor Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision DS-KH6310 - Video Intercom Indoor Station in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hikvision DS-KH6310 - Video Intercom Indoor Station

Hikvision DS-KH6310 - Video Intercom Indoor Station User Manual - English - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info