629347
125
Zoom out
Zoom in
Previous page
1/253
Next page
User Manual of Digital Video Recorder
124
7.4 Hot Spare Backup
This section is only applicable to the devices of HDVR series.
Before you start:
At least 2 devices are required to be online.
Purpose:
Several devices can form an N+1 hot spare system. The system consists of several working devices and a hot spare
device; when the working device fails, the hot spare device is switched into operation, thus increasing the
reliability of the system.
A bidirectional connection should be built for the working device and hot spare device.
Set a hot spare
device
Add a hot spare
device on normal
device
Add the normal
device on the hot
spare device
Start Finish
Figure 7. 17 Building Hot Spare System
7.4.1 Setting the Hot Spare Device
The camera connection will be disabled when the device works in the hot spare mode.
After switching the working mode of the hot spare device to normal mode, restore the defaults of the device
to ensure the normal operation afterwards.
Steps:
1. Enter the Hot Spare Settings interface of the hot spare device.
Menu>Configuration>Hot Spare
2. Select Hot Spare Mode as the working mode.
3. Click the button Apply and reboot the device to activate the settings.
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision DS-9108HWI-ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision DS-9108HWI-ST in the language / languages: English as an attachment in your email.

The manual is 10,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info