629350
71
Zoom out
Zoom in
Previous page
1/253
Next page
User Manual of Digital Video Recorder
70
1) Click the Record tab to configure the record parameters, such as stream type, resolution, bitrate type,
video quality, frame rate, etc.
2) Click More Settings to configure more parameters.
Figure 5. 3 Record Encoding (when HDD Mode is Group)
Figure 5. 4 Recording Encoding (when HDD Mode is Quota or Frame Extracting)
Pre-record: The time you set to record before the scheduled time or event. For example, when an
alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera
records it at 9:59:55.
Post-record: The time you set to record after the event or the scheduled time. For example, when
an alarm triggered the recording ends at 11:00, if you set the post-record time as 5 seconds, it
records till 11:00:05.
Expired Time: The time for keeping the record files in the HDDs, once exceeded, the files will be
deleted. The files will be saved permanently if the value is set as 0. The actual keeping time for the
files should be determined by the capacity of the HDDs.
Redundant Record/ Capture: Enabling redundant record or capture means you save the record
and captured picture in the redundant HDD. See Chapter 5.8 Configuring Redundant Recording/
Capture.
Record Audio: Enable this feature to record the sound and disable it to record the video without
sound.
Video Stream: Main stream and sub-stream are selectable for recording. When you select
sub-stream, you can record for a longer time with the same storage space
The Redundant Record/Capture option is only available when the HDD mode is Group.
Redundant HDD is required for the redundant record/capture function. For detailed information, see
Chapter 11.4.2 Setting HDD Property.
For network cameras, the parameters of Main Stream (Event) are not editable.
For DS-9100/9000/8100/8000HWI-ST & DS-7200HWI-SV series, you can enable/disable the WD1
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision DS-9108HFI-RT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision DS-9108HFI-RT in the language / languages: English as an attachment in your email.

The manual is 10,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hikvision DS-9108HFI-RT

Hikvision DS-9108HFI-RT User Manual - German - 46 pages

Hikvision DS-9108HFI-RT User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info