629373
74
Zoom out
Zoom in
Previous page
1/253
Next page
User Manual of Digital Video Recorder
73
5.2 Configuring Record/Capture Schedule
Purpose:
Set the record schedule, and then the camera automatically starts/stops recording according to the configured
schedule.
In this chapter, we take the record schedule procedure as an example, and the same procedure can be applied
to configure schedule for both continuous recording and capture. To schedule the automatic capture, you
need to choose the Capture tab in the Schedule interface.
We use the interface of DS-9000HFI-ST series (unless otherwise stated) as example to describe the following
settings.
Steps:
1. Enter the Record Schedule interface.
Menu > Record > Schedule
Figure 5. 9 Record Schedule
Normal recording
Recording triggered
by all event detection
Recording triggered
by alarm
Recording triggered
by motion detection
Recording triggered by
motion detection or alarm
Recording triggered
by motion detection
and alarm
Delete the schedule
Figure 5. 10 Record Type
The VCA settings and VCA event triggered recording / capture are supported by the analog cameras
01~04 or the smart IP cameras connected to the HDVR only.
To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video
Content Analysis) triggered recording, you must configure the motion detection settings, alarm input
settings or VCA settings as well. For detailed information, refer to Chapter 8.1, Chapter 8.2 and
Chapter 8.5.
2. Click the Record tab, select the camera for schedule settings, and then check the checkbox of Enable
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision DS-8008HWI-ST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision DS-8008HWI-ST in the language / languages: English as an attachment in your email.

The manual is 10,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info