629326
50
Zoom out
Zoom in
Previous page
1/88
Next page
50
Note: In order to make the cameras start recording, in “Recording” menu,
you must enable recording schedule and set “Rec Type” as “Motion Detection”
or “Motion | Alarm”. Please refer to chapter 5.12 for recording setup.
Step 7: Motion alarm schedule: When the motion alarm is happened in
schedule, DVR will response such as “On Screen Warning”, “Audible Warning”,
“Upload to Center” and “Trigger Alarm Output”. You can setup 4 time periods for one
day and 7 days for one week.
Note: Time periods in one day can not be repeated.
Step 8: Motion alarm handle method setup: You can select one or more handle
methods such as “On Screen Warning”, “Audible Warning”, “Upload to Center” and
“Trigger Alarm Output”.
Note: If “On Screen Warning” is enabled, when there is motion alarm
happened and DVR is in preview mode, DVR will switch to the related camera.
If you trigger more than one camera, DVR will pop-up them one by one every 10
seconds. When the motion alarm is disappeared, DVR will restore preview mode.
Step 9: Save motion alarm setup: Press “Confirm” button to return “Image
Setup” menu. In the “Image Setup” menu, press “Confirm” button to save the current
camera parameters.
Step 10: Save all cameras: You can repeat from step2 to step8 to setup motion
detection parameters for other cameras. Also you can copy the parameters of one
camera to any other cameras.
Note: Motion alarm area can not be copied.
If you want to disable motion alarm area and motion alarm policy, you just need
to select the motion alarm sensitivity as “Off”.
5.11 Preview
After the device started, the preview screen will be seen; then you can press
PREV key to switch between one screen and four screens; also you can switch to
the other single screen by pressing “EDIT”; or in “SHIFT” mode you can press
numeric keys to switch to the screen no. you want.
In “Preview” menu, you can setup preview mode, screen switch time, enable or
disable audio preview and preview layout.
Step 1: Enter “Preview menu: In the main menu, move “Active Frame” to
“Display” icon and press [ENTER], then go to “Preview Setup” and press [ENTER],
you can enter “preview” menu. Shown as Fig.5.20 below.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision DS-7204HVI-S series Net DVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision DS-7204HVI-S series Net DVR in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hikvision DS-7204HVI-S series Net DVR

Hikvision DS-7204HVI-S series Net DVR User Manual - Dutch - 56 pages

Hikvision DS-7204HVI-S series Net DVR User Manual - French - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info