731847
54
Zoom out
Zoom in
Previous page
1/91
Next page
DS-6700HUHI-K Series Encoder User Manual
53
To trigger an external alarm output when an event occurs, you need to go to the Alarm Output Settings
to set the related parameters. Refer to Chapter 7.1.3 Configuring Alarm Output for reference.
(4) Select the channel you want to trigger recording when a motion detection event occurs.
Figure 7. 6 Motion Detection-Alarm Linked Recording
8. Click Save to save the settings.
7.1.2 Configuring Alarm Input
Steps:
1. Go to Configuration> Event > Basic Event > Alarm Input to enter the Alarm Input Settings page.
2. Select the Alarm Input No.
3. Select the Alarm Type. The alarm type can be NO (Normally Open) and NC (Normally Closed).
4. Enter the Alarm Name.
5. Check Enable Alarm Input Handling.
6. Click Arming Schedule tab to set the arming schedule for the alarm input. Please refer to Step 6 in Chapter
7.1.1 Configuring Motion Detection.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision DS-6704HUHI-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision DS-6704HUHI-K in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info