731847
40
Zoom out
Zoom in
Previous page
1/91
Next page
DS-6700HUHI-K Series Encoder User Manual
39
Attached Image: Check the checkbox of Attached Image if you want to send email with attached alarm
images.
Interval: The interval refers to the time between two actions of sending attached pictures.
Authentication (optional): If your mail server requires authentication, check this checkbox to use
authentication to log in to this server and enter the login User Name and Password.
The Receiver table: Select the receiver to which the email is sent. Up to 3 receivers can be configured.
Receiver: The name of user to be notified.
Receiver’s Address: The Email address of user to be notified.
4. Click Save to save the Email settings.
Please refer to the following sections for more information:
Configure alarm linking methods with Send Email on Chapter 7.1.1 Configuring Motion Detection, Chapter 7.1.2
Configuring Alarm Input, Chapter 7.1.4 Configuring Video Loss Alarm, Chapter 7.1.5 Configuring Video
Tempering Alarm and Chapter 7.1.6 Handling Exception.
5.3.6 Configuring UPnPTM Settings
Purpose:
UPnP can permit the device seamlessly discover the presence of other network devices on the network and
establish functional network services for data sharing, communications, etc. If you want to use the UPnP
function to enable the fast connection of the device to the WAN via a router, you should configure the UPnP
parameters of the device.
Before you start:
If you want to enable the UPnP function of the device, you must enable the UPnP function of the router to
which your device is connected. When the network working mode of the device is set as multi-address, the Default
Route of the device should be in the same network segment as that of the LAN IP address of the router.
Steps:
1. Go to Configuration > Network > Basic Settings > NAT to enter the NAT settings page.
2. Check Enable UPnPTM to enable the function.
3. Select the Port Mapping Mode to Automatic or Manual.
When you select Automatic, the mapping ports can be automatically assigned by the router.
When you select Manual, you can customize the value of the external port.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hikvision DS-6704HUHI-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hikvision DS-6704HUHI-K in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info